Epoxy.com Catalog of Products

November 28, 2010

Epoxy.com Product Catalog

Here is a list of the current Epoxy.com Products.  In addition to the products below, we also have products which we can “custom” make to your specifications. This page is the most  frequently updated on our website.  So please check this page often, to see our latest product additions.

Injection and Binary Delivery Systems

  • Injection Machines
  • Manual Injection Pump
  • Injection Ports
  • Binary Tubes 75 ML
  • Binary Tubes 150 ML
  • Binary Tubes 300 ML
  • Static Mixing Tubes for Binary Tubes
  • Manual Gun for Binary Tubes
  • Pneumatic Gun

Misc. Products

  • Fiberglass Tape 4 and 6 inch wide
  • Fiberglass Woven For Reinforcement
  • Gage Rake for overlays
  • Mixing Paddles – drill mixers, Speedy mixers, Mud and Resin Mixers, and Cast head mixers
  • Spiked Rollers- for overlays
  • Spinney Rollers – for overlays
  • Shed Resistant Roller Covers
  • Professional Rollers Covers
  • Jumbo  2 1/4 Diameter Core Roller Covers
  • Perforated Core Roller Covers
  • Roller Handles
  • Floor Squeegees
  • Serrated Edge Floor Squeegees
  • Wood Back Squeegees
  • Mini Roller Covers and Frames
  • Rubber Gloves
  • Paint Brushes
  • Bondable PTFE Cut to Order
  • Graffiti Cleaner
  • and more …

Skip Navigation Links

Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service – Ordering and Order Status
                          Katey Fontaine, VP – Customer Service Director

714-657-3826  Technical Support
352-533-2167  Norm Lambert, President – Technical Support Director 

352-489-1666   Accounting and Administration
Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. – Florida and Vermont.  All rights reserved.

Epoxy.com Product #1 – ESD

October 22, 2010

Epoxy.com Product #1 – ESD

Electro Static Dissipative Epoxy Coating

Ultra High Solids Epoxy Coating


Epoxy.com Product #1 – ESD (Electrostatic Dissipative) Epoxy Coating for ESD Flooring is an ultra high solids bis-A epoxy floor coating designed to provide
electrostatic control properties to various surfaces including concrete or other nonconductive substrates. The use of a conductive primer will transmit conductive readings through
Epoxy.com Product #1 – ESD (Electrostatic Dissipative) Epoxy Coating for ESD Flooring if applied no thicker than 15 mils.

Epoxy.com Product #1 – ESD (Electrostatic Dissipative) Epoxy Coating for ESD Flooring provides excellent bond to concrete as well as high impact and wear.


  • Easy Application
  • Dissipates a 5000 volt Charge to Zero in less than 0.1 Seconds @72°F
    and 12%RH.
  • Available in Static Dissipative Range of 1,000,000 to 1,000,000,000 ohms
    per EOS/ESD Standards.
  • Consistent Electrical Resistance Ratings When Tested at 10-500 Volts.
  • High Gloss
  • Good Abrasion Resistance.
  • Easy to Clean..



Ultra High Solids Bis-A Epoxy Resin and Conductive Fillers.

Epoxy.com Epoxy Color Chart Here

Color Selection

Epoxy.com Product #1 – ESD (Electrostatic Dissipative) Epoxy Coating for ESD Flooring is available in Epoxy.com Colors listed to the right. Custom colors available as approved.


Surface Preparation

Surface preparation is considered to be the most important step of any
resinous flooring application. Improper surface preparation could turn what
seems to be a simple process into a lengthy, difficult repair. See Epoxy.com
Surface Preparation Guide
for proper surface preparation
procedures.  When in doubt you should always contact Epoxy.com Technical
Support with your questions.



Prime concrete surfaces with Epoxy.com Product #899 at
a rate of 250-300 SF per gallon and allow to dry to the touch.


Epoxy.com Product #1 – ESD (Electrostatic Dissipative) Epoxy Coating for ESD Flooring is normally spread with a
trowel or squeegee and back-rolled with a 3/8� medium nap roller. Care should be taken to minimize the entrapment of air caused by
over rolling.

Clean Up

Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner.


Epoxy.com Product #1 – ESD (Electrostatic Dissipative) Epoxy Coating for ESD Flooring will yield 12-15 mils
when spread at 100-130 sq ft/gal. 15 mils is considered the maximum thickness.


After completing the application of Epoxy.com Product 100MR Moisture Tolerant Primer and Base Coat and the topcoats or floor covering system, the installer
should provide the owner with maintenance instructions relevant to the specific topcoats or floor covering. If floors become slippery due to
animal fats, oil, grease, or soap film, clean and rinse thoroughly.


Contact Epoxy.com Customer Service Department.

Physical Data

Flammability ASTM D-635 Self Extinguishing
Fungus & Bacteria Growth Mil-F 52505� Will not support growth of fungus or bacteria

when subjected to mildew

Hardness ASTM D-2240 70-80 Shore D
Bond Strength to Concrete ASTM D-4541 Greater than 300psi (100% concrete failure)
Water Absorption ASTM D-570 Nil
Thermal Shock Resistance ASTM C-884 Passes
Abrasion Resistance ASTM D-6040 75-100mgs
Impact Resistance ASTM D-2794 100 in-lbs direct

Technical Data

Pot Life 35-40 Min. (@73°F)
Foot Traffic 14-16 hours (@73°F )
Complete Cure 5 days (@73°F.)
VOC Content Less than 50gm/l
Weight per Gallon 10.5-11 lbs per gal.
Glass, 60° Greater than 80

Technical Service

Contact Epoxy.com Technical Support Department

For more information Contact:

Norm Lambert
President &
Director of Technical Support
Epoxy Systems, Inc
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
352-533-2167 (Voice)
352-465-3497 (fax)
[Catalog of Products]
[Where to Start]
[Guide Specs]
[Epoxy Installation Guides]
[Epoxy Bonding Systems
[Chip Floors]
[Chemical Resistant Epoxy]
[Seamless Coatings] [Conductive Epoxy Flooring]
[Crack Injection of Concrete & Wood]
[ Epoxy Applications]
[Elastomeric Polyurethane Systems]
[Seamless Garage Flooring Resins]
[High Temperature Resins]
[Seamless Industrial Floors] [Joint Systems & Sealants]
[Methyl Methacrylate MMA ]
[Novolac Epoxy Resins]
[Epoxy Mortars & Grouts]
[Primers Sealers]
[Seamless Flooring]
[Dealers Wanted]
[Epoxy Installation Tips]
[Who We Are]

%d bloggers like this: