Here is a suggested list of the materials that you will need for most typical epoxy coating systems. This list is also useful for installing roller applied coating systems like Epoxy.com Chip Flooring.
- 1 roller pan
- 6 inserts for roller pan
- 15 stir sticks
- 12 (5 QT) plastic pails
- 3 (5 G) plastic pails
- Roll of Duct Tape
- 5 heavy duty 9″ roller frames
- 6 (3/8″ nap) roller covers *be sure the roller nap doesnot fall apart in hands*
- Roller handle extension poll
- 4 Hard Plastic Body Filler type Squeegees
- Paper 6oz Dixie cups
- 2 (2 blade) mixing paddles – should be at least 5 inches in diameter and capable of being used in a heavy duty drill
- Heavy Duty Drill for mixing paddles above
- 6 (2″) paint brushes *check bristles to be certain they CAN NOT be pulled out*
- Latex (or non latex) rubber gloves
- Vacuum (Shop Vacuum Quality)
- Stiff Bristled Broom *check to make sure bristles do not fall out*
- Chalk line or laser to set lines that need to be masked
- Roll of plastic to keep buckets on to avoid drips onto floor
- Go Jo Hand cleaner or fast orange for hands and skin
*Note – Epoxy does NOT come out of fabrics*
For more information visit www.epoxy.com.
Epoxy.com News and Tips 