June 23, 2016
A user writes: “I have seen a number of your products that are on a list or marked with a tag that says Zero (0) VOCs. When I look at the data sheet it says that the Epoxy.com product is 100% Solids, but does not say it is Zero (0) VOCs.”
Norm Lambert > Thank you for pointing that out. You bring up an excellent question. Epoxy.com Products that are 100% solids (100% active ingredients) do not contain solvent, that means they have no VOCs making them compliant with the toughest Low VOC Standards. I will start updating pages on the Epoxy.com to reflect that in the future. Until then please rest assured that all Epoxy.com Products that are 100% solids have no VOCs in them.
Leave a Comment » | coal tar epoxy questions, epoxy bar top resin, epoxy concrete repair, epoxy education, epoxy stone, glue, Novolac, Questions and Answers, Tile Adhesive, underwater epoxy, Waterproof Block Wall Basements, Waterproof Seamless Flooring, Waterproofing, Waterproofing Block Walls | Tagged: Epoxy, Low VOC, low voc epoxy, No VOC, zero (0) VOC | Permalink
Posted by Norm Lambert
August 19, 2010
Epoxy.com Under Water Epoxy and Polymers -FAQs
Epoxy.com Under Water Epoxies and Polymers –
Frequently Asked Questions
Below are some of the questions that have been emailed to Norm Lambert at email@example.com and some of his answers.
Have a question for Epoxy.com? If so, please email Epoxy.com Technical Support.
Patching and Coating With Epoxy.com Products at and Below the Water Line
Q: I am looking for a material that I can use to patch and coat a concrete seawall. I need to repair areas where the salt damage has eaten away
the concrete, and protect the rest of the surfaces. The area I need to do is in the tidal zone. I can clean up the concrete, dry it up (if I
need to) and apply the a material during low tide, but the product will need to be either very fast setting or be able to cure under water when
the tide comes in. What do you recommend?
Norm Lambert: First you will want to do good surface prepartion – www.epoxy.com/surfaceprep.aspx. Then you will want to use Epoxy.com Product #707 Splash Zone Coating and Underwater Paste is a moisture-insensitive, two-component, 100% solids epoxy-resin system. When mixed at a 1:1 ratio, by volume, this product produces a paste-like material that is ideal for protection or restoration of concrete, steel and timber piles and other structural elements in marine environments. It will easily do what you are looking to do and a whole lot more as well.
Epoxy.com Product #707 Splash Zone Coating and Underwater Paste has a long pot-life, and is available in a
fast Cure. Epoxy.com Product #707 Splash Zone Coating and Underwater Paste can be hand applied, above, at or below the water line.
It resists wave action and will even bond to wet surfaces.
Director of Technical Support
Epoxy Systems, Inc
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
[Epoxy.com Home Page]
[Catalog of Products]
[Where to Start]
[Elastomeric Polyurethane Systems]
Floors] [High Temperature]
[Joint Systems & Sealants]
[Mortars / Grouts]
[Misc.] [Seamless Flooring]
[Who We Are]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
Leave a Comment » | Chemical Resistance, Chemical Resistant Epoxy, Chemical Resistant Paint, Epoxy, Installation, Questions and Answers, Spash Zone Epoxy, Splashzone, Surface Preparation, under water epoxy, underwater epoxy, underwater epoxy, underwater epoxy coating, underwater epoxy paste, underwater paste, Waterproof Seamless Flooring | Permalink
Posted by Norm Lambert