Make Spaces Easy to Disinfect.

April 22, 2020
Picture of seamless chip flooring.
A Vermont Interstate Rest Area – Picture taken over 15 years after it was installed. Simple to disinfect. Wash with bleach and water as directed by CDC and you are done.

Scores of customer have taken full advantage of our systems to make spaces very easy to disinfect. Some of them have used our seamless systems on their floors, walls and ceilings. These seamless systems have no place for a virus or bacterial to hide. They are using enhanced disinfecting, and doing so without harming our material.

We can show you how to do this to your facility. Here are some of the kinds of places that this has been done. At minimum most do floors and cove.

  • Athletic Facilities
  • Food Manufacturing Facilities
  • Grocery Stores
  • Hospitals
  • Kennels
  • Laboratories
  • Nursing Homes
  • Pharmaceutical Facilities
  • Research Facilities
  • Restaurants
  • Schools
  • Stores
  • Veterinary Facilities

Contact Norm Lambert at Epoxy.com Technical Support for more information 1-352-533-2167, norm@epoxy.com

Epoxy Coating on Food Wagon walls and ceilings.
Walls and Ceilings of a Food Wagon. Installation on walls floors and ceiling makes it easy to completely disinfect.

Leave a Comment » | Block Walls, Care and Maintenance of Epoxy, Concrete Repair, disinfect, Epoxy, Installation, Novolac, repairing concrete with Epoxy, seamless epoxy cove, seamless epoxy floor coatings, seamless epoxy flooring system, Seamless Epoxy Flooring Systems, waterproof, Waterproofing | Tagged: , , , , , , , | Permalink
Posted by Norm Lambert

Disinfecting Epoxy.com Coatings and Flooring

March 17, 2020

We have many of our customers and their clients doing enhanced disinfecting of Epoxy.com Flooring and Coating Systems. I want all of you to concentrate on worrying about killing viruses and germs, and not worry about damaging the epoxy coatings and flooring you have purchased from us. Be sure to follow the NIH method with bleach below.

The National Institute of Health “Infection Prevention and Control of Epidemic- and Pandemic-Prone Acute Respiratory Infections in Health Care” recommends “1:100 dilution of 5% sodium hypochlorite is the usual recommendation. Use 1 part bleach to 99 parts cold tap water (1:100 dilution) for disinfection of surfaces.
Adjust ratio of bleach to water as needed to achieve appropriate concentration of sodium hypochlorite. For example, for bleach preparations containing 2.5% sodium hypochlorite, use twice as much bleach (i.e. 2 parts bleach to 98 parts water).”
https://www.ncbi.nlm.nih.gov/books/NBK214356/

You can feel confident to disinfect all Epoxy.com epoxy Flooring and Coating products, this way. Please contact Epoxy.com Technical support with any additional questions that you have at 352-533-2167 or email me directly at norm@epoxy.com

2 Comments | disinfect, Epoxy, Virus, viruses | Tagged: , | Permalink
Posted by Norm Lambert

%d bloggers like this: