Listing of Epoxy.com Epoxy Calculators

July 30, 2010

List of Epoxy.com Calculators

A current listing of Epoxy.com Material Calculators to date. Include Calculators for Epoxy.com Coatings, Epoxy.com Cove Base, Epoxy.com Dowel Bar Adhesives, Epoxy.com Stone Overlay Adhesive, Epoxy.com Table top Resin, Epoxy.com Tile Grout, Epoxy.com Table Top and Casting Resin, and Epoxy.com Electrical Potting and Casting Resin.


Epoxy.com New Calculators for ESD and Conductive Flooring

July 29, 2010

Epoxy.com Conductive Coatings and
Epoxy.com Electrostatic Dissipative Coatings

Electrostatic Dissipative (ESD) – 1 Million to 1 Billion OhmsConductive Epoxy – 100,000 to 1 Million Ohms


Epoxy.com announces its new Electrostatic (ESD) and Conductive Flooring Calculator.  All you have to know is the square footage that you have, and the type of flooring system you need and the calculator will help you estimate the material needed.

Please contact me with your questions.

Norm Lambert
President & Director of Technical Support
Epoxy Systems, Inc
Florida & Vermont USA
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
352-533-2167 (Voice)
352-465-3497 (fax)
norm@epoxy.com
www.epoxy.com     New Secure Login
Subscribe to Epoxy.com News Feed – Get the latest product information, tricks and tips delivered directly to you via your favorite news reader.


Epoxy.com Announces New Conductive Novolac Chemical Resistant Epoxy Flooring System

April 9, 2010

Epoxy.com a division of Epoxy Systems, Inc. announces that it has added  Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating to the Epoxy.com line of Conductive Resins.  Epoxy.com Product #676 is a 100% solids – Zero (0) VOC epoxy Novolac Chemical resistant conductive (anti-sparking) epoxy flooring and floor coating system ideal for severe chemical and solvent storage requiring a chemically resistant conductive and spark resistant surface.

 Applied at a nominal 1/16”, Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating offers the superior chemical resistance of an Epoxy.com  Novolac Epoxy Resin System while maintaining a conductive surface.

ADVANTAGES

  • Low viscosity for improved handling during application.
  • Exhibits excellent resistance to strong acids, alkalis and most industrial chemicals and solvents.
  • 100% Solids—low odor application and cure (0-VOC).
  • Bonds well to cool, damp substrates.
  •  Conductive & non sparking, 25,000 to 1,000,000 ohms resistance.

CONSIDERATIONS

  • Substrate  to receive Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating temperature must be a minimum of 50°F.
  • Substrate must be free of dirt, waxes, curing agents and other foreign materials.
  • Steel surfaces to receive Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating must be free of grease and oils.  Abrasive blast to SSPC-SP-3.
  • Refer to Epoxy.com Surface Preparation Guidelines for  substrate requirements.

COMPOSITION

100% Solids, modified polyamine, cured epoxy novolac resin and fillers

APPLICATION

SURFACE PREPARATION

Surface Preparation is the most critical portion of any successful resinous flooring system application.  All substrates must be properly prepared as outlined in Epoxy.com Surface Preparation Guidelines.  Contact epoxy.com  technical service department is pleased to answer any questions.

INSTALLATION

Installation of Epoxy.com Product #676 Novolac Novolac Epoxy Chemical Resistant Conductive Floor Coating will vary with application.  Normally spread with a trowel or squeegee and lightly back-rolled with a medium or short nap roller.  Care should be taken to minimize the entrapment of air caused by over rolling. For complete instructions, consult installation guide or Epoxy.com Technical Support Department

CLEAN-UP

Clean skin with soap and water.  Tools and equipment should be cleaned with xylene or lacquer thinner.

COVERAGE

Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating will yield approximately 32 mils when spread at 50 ft2 per gallon.  Two coats required.

COLOR

Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating is available in Standard Colors and Custom Colors as approved.

TECHNICAL DATA

Viscosity @ 75°F 1,000-1,500 cps
Mixing Ratio by volume 2 Part A to 1 Part B by Volume
Solids Content by volume     100% by volume
Volatile Organic Content 0
Weight per gallon, mixed 11.0-11.5 lbs. per gallon mixed

CURE/DRY TIME

Pot Life 20-25 min. @75°F
Dry to Touch 6-7 hours @ 75°F
Re-Coat 8-12 hours @ 75°F
Light Service 24 hours @ 75°F
Full Cure & Maximum Resistance     5 days

CHEMICAL RESISTANCE

REAGENT

RATING

Acetic Acid-10%, 30% R
Acetone L
Ammonia Hydroxide-38% R
Beer R
Bleach L
Brake Fluid R
Citric Acid-30% R
Citric Acid-40% R
Crude Oil R
Diesel Fuel R
Ethylene Glycol R
Fatty Acids R
Gasoline R
Hydrochloric Acid-37% R
Lactic Acid-50% R
Lactic Acid-80% R
Methyl Ethyl Ketone R
Methylene Chloride L
Nitric Acid-10% R
Peroxide-35% R
Phosphoric Acid R
Skydrol R
Sodium Hydroxide-50% R
Sulfuric Acid-98% R
Toluene R
Urea R
Vinegar R
Xylene R
R-Recommended for continuous service
L-Limited Recommendation, occasional spills
*-May cause slight stain or discoloration

MAINTENANCE

After completing the application of Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating, the installer should provide the owner with maintenance instructions. Epoxy.com Product #676 Conductive Chemically Resistant Novolac Floor Coating is easily cleaned with neutral soaps or detergents.

For more information please contact Epoxy.com Technical Support at: 352-533-2167 or email them at info@epoxy.com


%d bloggers like this: