Electrostatic Dissipative Epoxy Installation Guide.

Epoxy Installation Guide

Conductive Epoxy Primer & ESD/Conductive EpoxyCoating

Epoxy.com Product #1 ESD is an Epoxy Electrostatic Dissipating High Build Coating System installed aat 40-45 mils thick.  When installed over a standard primer gives you 1,000,000 – 1,000,000 ohms (Electrostatic Dissipative – ESD).  When installed over Epoxy Conductive Primer #671 gives you 100,000 – 1,000,000 ohms (Conductive).

Product #1ESD Epoxy Coating System consists of Product #899 Epoxy Primer followed with one finish coat  of Product #1ESD/Conductive Epoxy Coating. Product #1ESD/Conductive is available in pigmented finish only. Product #1ESD Epoxy Coating System will test in the “ESD” range, between 1,000,000 and 1,000,000,000 ohms electrical resistance when Product #1ESD/Conductive is applied over a non-conductive primer (or non-conductive bodycoat), and produces a 12-15 mil thick ESD floor coating system. Important  Note: Product #1ESD/Conductive when applied over a conductive primer or  conductive basecoat will test in the “conductive” range, between 25,000 and 1,000,000 ohms electrical resistance. Refer to Product #1 Conductive Coating  System for further details. A thicker system of 20-30 mils or greater can be achieved by adding a nonconductive bodycoat, contact Epoxy.com for details.

For more information see Installation Instructions for Epoxy Electrostatic Dissipative Flooring #1ESD
Norm Lambert
President &
Director of Technical Support
Epoxy Systems, Inc
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
352-533-2167 (Voice)
352-465-3497 (fax)
norm@epoxy.com
[Catalog of Products]
[Where to Start]
[Guide Specs]
[Epoxy Installation Guides]
[Epoxy Bonding Systems
]
[Chip Floors]
[Chemical Resistant Epoxy]
[Seamless Coatings] [Conductive Epoxy Flooring]
[Crack Injection of Concrete & Wood]
[ Epoxy Applications]
[Elastomeric Polyurethane Systems]
[Seamless Garage Flooring Resins]
[High Temperature Resins]
[Seamless Industrial Floors] [Joint Systems & Sealants]
[Methyl Methacrylate MMA ]
[Novolac Epoxy Resins]
[Epoxy Mortars & Grouts]
[Primers Sealers]
[Seamless Flooring]
[Waterproofing]
[Dealers Wanted]
[Epoxy Installation Tips]
[Who We Are]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: