Installing Epoxy in Coolers and Cold Temperature
Extend Epoxy Installation Season into Winter
I have spoken on this subject here before but this time of year I get a lot of calls and emails about installing epoxy in cold temperatures. Our company started out as an installation company in Vermont. Summers are very short and winters are very long in Vermont. To stay a viable company, we had to figure ways of working through the winter.
Tenting and heating areas during the winter is time consuming and expensive. The solution is found in resin products that will set in low temperatures. The most durable and cost effective options of installation at cold temperatures is Epoxy and Methyl Methacrylate.
Cold Temperature Cure Resins can also be used as a super-fast setting Resinous Mortar or Coating at normal temperatures. Our Cold Temperature Cure Resins used at normal temperature give you quick turnaround time for small jobs, or larger jobs that require a short turn-around time.
Cold Temperatures Epoxies
Cold Temperature Cure Epoxy Resins allow installation to be done at low temperatures as low as 35°F., expanding your epoxy coating and epoxy flooring installation season. Epoxy.com Cold Temperature Cure Epoxy Resins can also be used in cold storage areas like food processing areas, where the temperature cannot be raised higher than 35° F or so. Normal cured epoxy typically requires 50°F or more.
Depending on how you mix the aggregate into the products below, they can be used as a mortar for overlays, or a grout for sealing between other hardened construction materials.
Commonly Used Cold Temperature epoxies
Product #1 Cold Temperature Cure Epoxy Coating is 100% solids and specially formulated coatings for cold temperature applications. Cold Temperature Epoxy Coating #1 is able to cure at temperatures as low as 35°F. It is has Zero (0) VOCs. Since it has no VOCs, it has no solvent so it meets the strictest possible standard for a low VOC coating. It is often used in coolers and food preparation areas that require constant low temperatures. Product #1 Cold Temperature Cure Epoxy Coating is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.
Product #10 Cold Temperature Curing Epoxy Mortar Resin – This product has a low modulus of elasticity (flexibility) and is Low Viscosity. The low viscosity allows heavy loading of the right fillers. The heavy filler loading helps not only to save money, but helps to maintain better thermal coefficient with respect to concrete and steel. The low modulus of elasticity prevents it from being brittle making it less vulnerable to thermal coefficient differences. It also gives it better impact resistance.
You can find more information on cold temperature cured epoxy at: http://www.epoxy.com/EpoxyColdCured.aspx.