Improved Epoxy Gel Adhesives Added to Epoxy.com

What are Epoxy Gel Adhesives

Epoxy Gel Adhesives are thickened 100% solid 2-Component Epoxy Resin and Epoxy Hardener systems. Epoxy Gel Adhesives come in various viscosities from whip cream consistency to clay consistency. Some Epoxy Gel Adhesives have a longer working time, and slow set. Some Epoxy Gel Adhesives have a short working time and fast set.

Epoxy Gel Adhesives can have a “high modulus of elasticity” (rigid), or a “low modulus of elasticity” (flexible to semi-flexible). All the Epoxy Gel Adhesives that we sell are very strong. Our Epoxy Gel Adhesives when applied to most common construction structural material that are properly prepared have a bond strength to the substrate greater than the tensile strength of the material you are bonding to. In other words if you go to pull it off from the substrate that you are bonded to, the substrate will fail before the bond of the Epoxy Gel Adhesive will fail.

Uses for Epoxy Gel Adhesives

Epoxy Gel Adhesives are one of the most versatile tools in the construction industry. Epoxy Gel Adhesives are useful for bonding concrete to concrete, wood to concrete, wood to wood, and for that matter most typical construction structural materials to other construction structural materials. Epoxy Gel Adhesives are also useful in patching and repairing inperfections in concrete, wood and steel. Epoxy Gel Adhesives have also successfully been used to repair wood damaged by termites, wet rot, or dry rot. Epoxy Gel Adhesives are used in setting dowel bars, anchor bolts, and ports for epoxy injection.

Newest Epoxy Gel Adhesives Added to Epoxy.com Product line.

Product #2005 Low Modulus Fast Setting Epoxy Gel is a two component 100% solids designed for shallow repair on either vertical or horizontal surfaces. This product is easy to mix and use and has the consistency of Vaseline petroleum jelly. Additionally, the product, because it is a 100% solids product, can be applied thicker on horizontal surfaces when required.

Product #2006 – Epoxy High-Mod Gel Adhesive and Bonding Resin is a 100% solids high-mod epoxy gel adhesive used for vertical and overhead bonding applications and structural repairs. Epoxy High-Mod Gel Adhesive and Bonding Resin – Product #2006 is also used as a grout for anchor bolts, dowels and rebar. Epoxy High-Mod Gel Adhesive and Bonding Resin – Product #2006 Meets ASTM C881 Requirements for Type I, Type II, Grade 3, Class B, C, D, E.

Product #2007 Epoxy Fresh Concrete to Hardened Concrete Adhesive is a two component, 100% solids epoxy resin system designed to bond new concrete to old and other materials to concrete. It has a convenient 2:1 mix ratio, by ASTM C-881-90, Types I, II, IV and V, Grade 2, Class “B” and “C” volume with a viscosity similar to heavyweight oil. Epoxy Fresh Concrete to Hardened Concrete Adhesive #2007 (adhesive) exceeds the requirements of ASTM C-881 Type II, Grade 2, Class “B” “C” “D” and E.

Product #2011 Low Modulus Fast Set Epoxy Gel is a two component 100% solids polymer system designed for applications where a resilient joint material is needed. The two component material (standard) is supplied with a gray component and a clear component. Product #2011 was developed for plural component pump equipment, and is available in cartridge units.

Product #2704 Epoxy Gel Super Fast Cure is a fast setting, 100% solids epoxy crack gel and filler used to line, patch, or repair floor and wall surfaces. Epoxy Gel Super Fast Cure Product #2704 is the ideal material for repair of surfaces damaged from environmental or chemical attack. Epoxy Gel Super Fast Cure Product #2704 can also be used as a base material beneath coating, slurry, and mortar systems to repair before coating.

Product #2707 Splash Zone Epoxy and Underwater Epoxy Paste is a moisture-insensitive, two-component, 100% solids epoxy-resin system. Splash Zone Epoxy and Underwater Epoxy Paste Product #2707 is mixed at a 2:1 ratio, by volume, this product produces a paste-like material that is ideal for protection or restoration of concrete, steel and timber piles and other structural elements in marine environments.

Limitations

Epoxy.com does not recommend using any epoxy gel adhesive to bond anything to a ceiling without reliable mechanical methods of attachment as well.

More Information on Epoxy Gel Adhesives

Contact Epoxy.com Technical Support by phone 352-533-2167 or email info@epoxy.com for more information.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: