epoxy.com 100% solids products

Epoxy.com Product #15: Versatile Epoxy Resin for Flooring Applications

by

Epoxy.com Product #15 is a high-quality, 100% solids epoxy resin system renowned for its versatility in various flooring applications. Its exceptional chemical resistance and durability make it suitable for use as a floor sealer, primer, and mortar.

Applications and Uses

        1.        Floor Sealer:

        •        Purpose: Provides a protective barrier against chemicals, stains, and wear, enhancing the longevity of concrete floors.

        •        Application: Apply a clear coat over porous materials to seal and protect the surface.

        2.        Floor Primer:

        •        Purpose: Acts as a bonding agent between the substrate and subsequent epoxy coatings, ensuring adhesion, uniformity and reducing topcoat bubbles.

        •        Application: Use as a chemical-resistant primer before applying topcoats or additional flooring systems.

        3.        Mortar:

        •        Purpose: When combined with aggregates, it creates a robust mortar suitable for repairing potholes or creating seamless flooring coves.

        •        Application: Mix with silica sand to form a durable mortar for concrete repairs or as a base coving material.

Application Guidelines

        1.        Surface Preparation:

        •        Ensure the substrate is clean, dry, and free from contaminants such as oil, grease, or dust.

        •        Mechanically prepare the surface to achieve a profile suitable for epoxy adhesion.

        2.        Mixing:

        •        Combine Part A (resin) and Part B (hardener) in the recommended ratio.

        •        Mix thoroughly until a uniform consistency is achieved, avoiding the introduction of air bubbles.

        3.        Application:

        •        As a Sealer: Apply with a roller or squeegee, ensuring even coverage.

        •        As a Primer: Apply a thin coat and allow it to become tacky before applying subsequent layers.

        •        As a Mortar: After mixing with aggregates, trowel the mixture onto the prepared surface, compacting it to ensure proper bonding.

        4.        Curing:

        •        Allow the applied epoxy to cure as per the manufacturer’s recommendations, considering ambient temperature and humidity.

        •        Protect the area from traffic and moisture during the curing process to ensure optimal results.

Advantages of Epoxy.com Product #15

        •        Chemical Resistance: Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents, making it suitable for harsh environments.

        •        Durability: Quartz floors are incredibly durable, making them suitable for high-traffic areas and heavy-duty use.

        •        Versatility: Can be applied as a thin coating or as a thick aggregate-filled system, accommodating various application needs.

        •        UV Stability: Slower than other clear epoxies to oxidize in direct sunlight and indoor UV light, reducing yellowing and maintaining appearance over time.

        •        Non-Shrink: Maintains volume during curing, ensuring dimensional stability and adherence to the substrate.

        •        Low Viscosity: Exhibits excellent wetting properties, allowing for deep penetration into substrates and effective bonding.

Epoxy.com Product #15 is a reliable and versatile solution for various flooring applications, offering superior performance and longevity. Its adaptability as a sealer, primer, quartz flooring system, or mortar making it an excellent choice for both industrial and residential projects.

For more detailed information Contact Us Today:

Call: 321-206-1833 (orders)

352-533-2167 (technical support)

Email: sales@epoxy.com

Visit: www.epoxy.com       

Cold Cure Epoxy – The Ultimate Solution for Low-Temperature Applications

by

When temperatures drop, traditional epoxy coatings often struggle to cure effectively, delaying projects and increasing costs. That’s where Cold Cure Epoxy steps in as the perfect solution. Designed specifically to perform in low-temperature environments, Cold Cure Epoxy ensures reliable results even in challenging conditions.

In this blog, we’ll explore the benefits of Cold Cure Epoxy and provide step-by-step instructions for its installation.

What is Cold Cure Epoxy?

Cold Cure Epoxy is a specially formulated epoxy coating designed to cure in temperatures as low as 35°F (1.6°C). It provides the same durability, adhesion, and chemical resistance as standard epoxy coatings, making it an excellent choice for projects in colder environments.

Key Features of Cold Cure Epoxy

        1.        Low-Temperature Curing: Ideal for winter applications or unheated spaces.

        2.        Strong Adhesion: Bonds securely to concrete, wood, and other surfaces.

        3.        Chemical and Abrasion Resistance: Ensures durability even in industrial settings.

        4.        Versatility: Suitable for floors, walls, and other surfaces requiring a protective coating.

Applications for Cold Cure Epoxy

        •        Garage Floors: A reliable solution for homeowners in colder regions.

        •        Industrial Facilities: Ideal for unheated warehouses or production areas.

        •        Outdoor Surfaces: Works well on patios, walkways, and loading docks.

        •        Cold Storage Rooms: Perfect for freezers or cold storage facilities.

Step-by-Step Installation Instructions for Cold Cure Epoxy

Materials Needed

        •        Cold Cure Epoxy Resin and Hardener (e.g., Epoxy.com Cold Cure #XXX)

        •        Mixing tools (drill with paddle mixer or stir stick)

        •        Rollers or brushes

        •        Surface preparation tools (grinder, vacuum, or broom)

        •        Protective gear (gloves, goggles, and mask)

Step 1: Surface Preparation

        1.        Clean the Surface: Remove all dirt, oil, grease, and debris. Use a degreaser if necessary.

        2.        Repair Cracks and Holes: Patch any damage with an epoxy filler to create a smooth surface.

        3.         Mechanically grind  or shot blast the surface to roughen surface texture  and remove weak and surface contamination for optimal adhesion.

        4.        Dry Thoroughly: Ensure the surface is dry before application, as moisture can interfere with bonding.

Step 2: Mix the Epoxy

        1.        Measure Components: Accurately measure the resin and hardener as per the manufacturer’s instructions.

        2.        Mix Thoroughly: Blend the components using a drill with a properly sized paddle mixer  for 3 minutes. Ensure the mixture is uniform and free of streaks.

        3.        Avoid Over mixing: Do not introduce air bubbles into the mixture.

Step 3: Apply the Epoxy

        1.        Apply the Primer (Optional): If specified, use a primer layer for better adhesion. Allow it to cure as instructed.

        2.        First Coat:: Apply  epoxy onto the surface and spread it evenly using a roller or brush.

        3.        Allow Initial Cure: Follow the manufacturer’s recommended curing time before applying the second coat.

Step 4: Apply the Second Coat

        1.        Repeat Application: Spread the second coat evenly to achieve the desired thickness and finish.

        2.        Add Non-Slip Aggregate (Optional): Add synthetic  anti-skid to the coatings above or  sprinkle a non-slip additive on the surface if required.

Step 5: Allow Final Curing

        1.        Cure Time: Cold Cure Epoxy will typically cure within 24–48 hours, even at low temperatures.

        2.        Inspect and Clean: Once cured, inspect the surface for consistency and clean up any excess material.

Pro Tips for a Successful Installation

        •        Work in Small Batches: Cold temperatures can slow the curing process, so mix only what you can use within the pot life.

        •        Maintain Temperature: Ensure the ambient temperature stays consistent during the curing process.

        •        Use Proper Ventilation: Work in a well-ventilated area to avoid inhaling fumes.

Why Choose Epoxy.com for Cold Cure Epoxy?

At Epoxy.com, we pride ourselves on offering high-performance epoxy solutions that meet the demands of any environment. Our Cold Cure Epoxy products are rigorously tested to ensure they deliver exceptional results, no matter the temperature.

Get Started with Cold Cure Epoxy Today!

Ready to tackle your next low-temperature project with confidence? Browse our selection of Cold Cure Epoxy products and contact our team for expert guidance. Whether it’s a residential, commercial, or industrial application, we have the perfect solution for you.

Contact Us Today:

Call: 321-206-1833 (orders)

352-533-2167 (technical support)

Email: sales@epoxy.com

Visit: www.epoxy.com

With Cold Cure Epoxy from Epoxy.com, cold weather is no longer a barrier to achieving durable, long-lasting coatings.

Epoxy Novolac Coating#633

by
  • Product Description: Product #633, is a 100% solids epoxy Novolac Sulfuric acid resistant epoxy coating that is highly resistant to chemicals and solvents. It’s ideal for applications in harsh environments like chemical plants, pulp mills, and water treatment facilities.
  • Advantages: The coating exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents. It can be applied in cool, damp conditions and in occupied facilities. It forms a virtual moisture barrier and meets USDA standards.
  • Considerations: Concrete and steel surfaces must be properly prepared before application. Concrete should be free of dirt, waxes, and other foreign materials, while steel should be free of grease and oils – https://www.epoxy.com/surfaceprep.aspx.
  • Application: The coating can be applied by brush, roller, squeegee, or airless spray. It requires two coats for optimal performance, with a wet film thickness of 8-10 mils per coat.
  • Physical Properties: The coating has a tensile strength of 10,400 psi, a hardness of 86 Shore D, and can withstand temperatures up to 325 degrees Fahrenheit.
  • Chemical Resistance: This is Chemical containment coating resistant to a wide range of chemicals, including acetic acid, hydrochloric acid, sulfuric acid, and gasoline.
  • Typical Uses – This product is designed to withstand harsh conditions and provide long-lasting protection in high-exposure areas.
    1. Secondary Containment: Ideal for areas that need to contain spills or leaks of hazardous materials. Product #633 is industrial epoxy for harsh chemical environments
    2. Solvent Storage: Suitable for environments where solvents are stored, providing a protective barrier against chemical exposure.
    3. Pump Pads and Trenches: Used in industrial settings to protect surfaces exposed to harsh chemicals and solvents
    4. Chemical Process Areas: Perfect for areas involved in chemical processing, offering resistance to strong acids, alkalis, and most industrial chemicals.
    5. Battery Charge Areas: Provides a durable coating for areas where batteries are charged, protecting against chemical spills and leaks.
    6. Protective Coating for Concrete and Steel: Used in extremely corrosive areas of chemical plants, pulp mills, water and waste treatment facilities, and gas and electric utilities.

Related Products

Contact Us Today for Expert Advice & Ordering

📞 Call: 321-206-1833 (Orders)

📞 Technical Support: 352-533-2167

📧 Email: sales@epoxy.com

🌐 Visit: www.epoxy.com

https://www.epoxy.com/633.aspx

Epoxy.com Quartz Flooring

by

Epoxy.com Quartz Flooring offers several advantages that make it a popular choice for various applications:

Durability:

Quartz floors are incredibly durable, making them suitable for high-traffic areas and heavy-duty use.

Aesthetic Appeal:

The decorative quartz incorporated into the epoxy resin creates a visually appealing surface that can be customized with different color mixes.

Non-Slip Surface:

The slightly textured surface provides excellent slip resistance, making it ideal for areas that may become wet or slippery.

Ease of Cleaning:

The nearly seamless surface limits spaces where dirt and debris can collect, making it easy to clean and maintain.

Versatility:

Quartz epoxy flooring can be used in a wide range of settings, including restaurants, manufacturing plants, kitchens, research labs, locker rooms, bathrooms, showrooms, schools, warehouses, healthcare facilities, and more.

Would you like to know more about the installation process or specific applications for quartz flooring? For help email me norm@epoxy.com or call me at 1-352-533-2167.

www.epoxy.com