Why Use Epoxy.com Products in “Green” Buildings?

August 20, 2012

110614_2044_EpoxyChipFl10.pngEpoxy.com’s 100% solid products (which are most of our product line) are included in many “Green” buildings. The logic for that is this:

1. Epoxy.com 100% solid products have  no VOCs. So you are reducing the carbon emissions.

2. Typical Epoxy.com 100% solid systems have done their job for decades, and there is no reason to believe they will not last for decades more. I personally have jobs that I installed with them that go back as much as a third of a century, that are not even starting to show signs that they will need replacement. That is the ultimate in reuse.

3. There is no need to recycle a product that can be reused for decades, but you can use recycled materials like glass aggregate in the epoxy matrix.

Epoxy.com encourages our customers to order material as they need it and to use all their materials before their expiration. That is why we do not require large stocking orders from new dealers, like most other companies. We want our customers to use up material they buy from us and not have any for it run out of shelf life. However, if Epoxy.com products do run out of shelf life, they are typically mixed and cured before disposal as is consitered in under most if not all local regulations as inert as common trash.

You can find more information about Epoxy.com Zero (0) VOC products at: https://www.epoxy.com/zero_voc.aspx

www.epoxy.com – Epoxy.com Home Page.

Please like our Facebook page at: www.facebook.com/epoxy.com/


Epoxy.com Catalog of Products

November 28, 2010

Epoxy.com Product Catalog

Here is a list of the current Epoxy.com Products.  In addition to the products below, we also have products which we can “custom” make to your specifications. This page is the most  frequently updated on our website.  So please check this page often, to see our latest product additions.

Injection and Binary Delivery Systems

  • Injection Machines
  • Manual Injection Pump
  • Injection Ports
  • Binary Tubes 75 ML
  • Binary Tubes 150 ML
  • Binary Tubes 300 ML
  • Static Mixing Tubes for Binary Tubes
  • Manual Gun for Binary Tubes
  • Pneumatic Gun

Misc. Products

  • Fiberglass Tape 4 and 6 inch wide
  • Fiberglass Woven For Reinforcement
  • Gage Rake for overlays
  • Mixing Paddles – drill mixers, Speedy mixers, Mud and Resin Mixers, and Cast head mixers
  • Spiked Rollers- for overlays
  • Spinney Rollers – for overlays
  • Shed Resistant Roller Covers
  • Professional Rollers Covers
  • Jumbo  2 1/4 Diameter Core Roller Covers
  • Perforated Core Roller Covers
  • Roller Handles
  • Floor Squeegees
  • Serrated Edge Floor Squeegees
  • Wood Back Squeegees
  • Mini Roller Covers and Frames
  • Rubber Gloves
  • Paint Brushes
  • Bondable PTFE Cut to Order
  • Graffiti Cleaner
  • and more …

Skip Navigation Links

Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service – Ordering and Order Status
                          Katey Fontaine, VP – Customer Service Director
sales@epoxy.com

714-657-3826  Technical Support
352-533-2167  Norm Lambert, President – Technical Support Director 
info@epoxy.com

352-489-1666   Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com

352-489-1625   Fax line to all Departments
www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. – Florida and Vermont.  All rights reserved.


Epoxy.com Table Top & Casting Epoxy Resin Resin

August 10, 2010

[Home] [Catalog of Products][Where to Start][Bonding Systems] [Chip Floors][Chemical Resistance][Coatings] [Conductive][Applications] [Elastomeric Polyurethane Systems][Garage Floors]
[High Temperature][Industrial Floors] [Injection] [Joint Systems & Sealants][Mortars / Grouts] [Novolac][Polymer Systems][Primers Sealers] [Misc.]
[Seamless Flooring] [http://www.epoxysystems.com/Waterproofing] [Dealers Wanted][Installation Tips} [Product Guide] [Wood Filler]
[Who We Are] [Guide Specs][Tech Data Sheets in Acrobat Format][MSDS in Acrobat Format][Online Ordering Authorization Form]

A customer Asks: “I am looking to do my bar top.  Can I stain it with polyurethane before I install Epoxy.com Product #214  100% Solids Epoxy Casting Tabletop and Bar Top Resin?”

Answer: It is always better to bond the Epoxy.com Product #214100% Solids Epoxy Casting Tabletop and Bar Top Resin directly to the substrate so you will get the strongest possible bond.  However, if you must stain you should use a stain that does not waterproof the substrate.  Of course you should always do a mockup if you plan to use any kind of stain.  Some people like to use Epoxy.com Product #1  a two component, zero (0) VOC, 100% solids epoxy Hi-Build epoxy coating as a pigmented background. That way you have the strength of Epoxy, while getting a background color.

NormLambert

President & Director of Technical Support
Epoxy Systems, Inc
Florida & Vermont USA
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
352-533-2167 (Voice)
352-465-3497 (fax)
norm@epoxy.com
www.epoxy.com     New Secure Login
www.epoxy.com/wireless Now Available on your web enabled  Wireless Devices

Subscribe to Epoxy.com News Feed – Get the latest product information, tricks and tips delivered directly to you via your favorite news reader.


%d bloggers like this: