Concrete Crack Healer and Sealer

October 7, 2025

Fast Crack Healer and Sealer for Concrete Floors

When concrete floors start to show signs of cracking or surface wear, repairing them quickly and effectively can prevent costly downtime. Epoxy.com Product #684LV is a methyl methacrylate (MMA) resin system designed to penetrate, bond, and seal concrete surfaces — not just on bridge decks, but anywhere durable protection is needed.

What Makes #684LV Different

Unlike typical epoxies or sealers, #684LV is ultra-low viscosity and fast-curing. It seeps deep into cracks and pores in the concrete, restoring structural integrity while sealing out moisture and contaminants. Once cured, it forms a clear, tough, chemical-resistant surface that can be top-coated or left exposed.

  • Fast cure: typically 30–45 minutes even at low temperatures.
  • Deep penetration: bonds within the concrete matrix.
  • Chemical resistance: excellent for acids, fuels, and solvents.
  • Low downtime: floors can be reopened to traffic within an hour.

Ideal Uses Beyond Bridge Decks

While #684LV is trusted for infrastructure work, it’s equally effective in:

  • Industrial plants and warehouses – quick repairs between shifts.
  • Food and beverage facilities – sealing cracks to prevent bacterial growth.
  • Retail and commercial floors – keeping polished concrete from spalling.
  • Chemical and wastewater facilities – long-term protection from vapor intrusion.
  • Parking decks and ramps – extending the life of exposed slabs.

Wherever rapid turnaround and strong bonding are required, #684LV is a proven performer.

Application Notes

  1. Prepare the surface by cleaning and drying the concrete thoroughly.
  2. Flood-coat or broom-apply #684LV until refusal — allow penetration.
  3. Optional broadcast: silica sand for slip resistance or mechanical profile.
  4. Reopen to traffic within approximately one hour (temperature dependent).

For severe cracking, the material can also be pressure-injected to restore internal bond.

The Bottom Line

Epoxy.com Product #684LV gives contractors and facility managers a fast, permanent way to stop cracks before they grow — without waiting days for cure time. It’s a simple, reliable solution for extending the life of your concrete floor systems.

For more information contact:

Epoxy.com 
A Division of Epoxy Systems, Inc
A Vermont Corporation 
USA 

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 – 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service – Ordering and Order Status
                         Katey Lambert-Fontaine, VP – Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President – Technical Support Director 
                         info@epoxy.com

Leave a Comment » | Bonding systems, Bridge Concrete Repair, Concrete Infrastructure Repair, Epoxy, fast setting, Methyl Methacrylate (MMA), MMA Crack Healer and sealer, Winter cure, Winter installation | Tagged: , , , , , , , , , , | Permalink
Posted by Norm Lambert

Chemical Resistant Epoxy Selection

October 20, 2016

Requirements for a Chemical Resistant Epoxy

Our Epoxy and Vinyl Ester product lines has extensive uses in Chemical Containment
and Chemical Resistance projects. The kind of product and systems we recommend are
based on a number of factors.  First we need to know exactly what you are doing:

  1. Are you patching concrete that has been damaged already? If so what is the extent
    of the damage?
  2. Do you need a secondary containment coating? If so what kind of traffic (if any)
    will this area see? Many of our systems will handle very heavy traffic.
  3. Are there any cracks that need repairing? If so how many lineal feet of cracks
    are there, what is the average depth and what is the average width. Repairing the cracks
    is the first step in making your project water and chemical tight.
  4. Are you looking to grout tile? We have chemically resistant Epoxy Tile Grout that
    has excellent chemical resistance.
  5. Is there any petroleum oil saturated concrete in the area. If so we have a product
    for that too.
  6. Is there any moisture vapor that is being transmitted through the floor?  We
    have solutions for that so please bring that to our attention when you contact us.
  7. Is this in an area where Static Disruptive or Conductive materials are needed (typically
    only in an explosive environment or where delicate electronics must be protected
    from static discharge).
  8. Total square footage of area requiring Chemical
    Resistant Epoxy or Vinyl Ester.

Then we will need to know some specifics about the chemical you are trying to protect
against:

  1. What is the specific chemical (or chemicals) that you are trying to resist against?
  2. What is the specific concentration of the chemical (or chemicals)?
  3. What is the duration of the exposure, before it will be cleaned up (if ever)?
  4. Is the exposure at an elevated temperature? If so what is that temperature, and
    how long will the chemicals be at this elevated temperature

If you have this information when you contact us, we can quickly help you to decide
what chemical resistant system is best and most economical for you.

Here is some additional reading that might interest you.

logo

For more information contact Epoxy.com Technical Support at info@epoxy.com or by calling us at 352-533-2167.

Leave a Comment » | Care and Maintenance of Epoxy, Chemical Resistance, Chemical Resistant Epoxy, Chemical Resistant Paint, Coal Tar Epoxy Coatings, Epoxy, Installation, Novolac, Questions and Answers, Tile Grout | Tagged: , , , , , , , , , | Permalink
Posted by Norm Lambert