Epoxy Table Top Resin

February 2, 2016

This article is written in two parts. This section will deal with all the uses of Epoxy.com Product #214 Table Top Resin. The second article will deal with the installation of the material.

So many of you are now scratching your head, trying to figure out how I can devote an entire article to what to use our epoxy table top resin for. Well, the table top resin isn’t just for table tops. Product #214 is used for a wide variety of uses

Characteristics

Product #214 Water Clear Epoxy Casting – Tabletop Resin – Bar Top Resin is an all-purpose, low viscosity epoxy resin system for coating wood and concrete counter tops, tabletops, bar tops and similar applications. It has excellent clarity and color retention. Our clear casting resin and tabletop resin / bar top Epoxy has zero (0) VOC making it essentially odorless and can therefore be used in occupied areas. It de-bubbles and flattens a lot easier than similar materials.

Casting Resin

Our epoxy table top resin is frequently used as “casting resin”. It is poured into forms typically made out of silicone. The material is allowed to harden and then forms removed. This can be for very small parts or it can be used for very large parts.

Table Top Resin as Flooring

Product #214 Epoxy Table Top Resin can be used when a super flat floor is required. It is possible to get a floor as flat as water. This is important under certain types of machinery such as MRI machines and equipment used to product high precision parts for use in items like space satellites.

Advantages of Clear Table Top Resin #214

  • Low odor for use in occupied areas
  • Low viscosity – good wetting properties
  • Meets USDA standards for use in food handling applications
  • Glossy finish
  • Stain resistant
  • Zero (0) VOC – No VOC means it meets the toughest low VOC standards.

The epoxy table top resin that we sell has also been used for dance floors, stages, theme parks and homes to produce a floor to simulate water. Often times this is done with rocks and other objects in the epoxy to give the appearance of steam, a river, a lake, or the ocean. At the same time it allows a super flat finish that allows dancing, and all the things normally associated with a flat floor.

Multi-Aggregate Tiles and Flooring

Product #214 Clear Casting-Tabletop-Bar Top Resin is used as a clear adhesive matrix for specialty colored glass and colored aggregate flooring and tiles. Product #214 Clear Casting-Clear Tabletop Resin – Clear Bar Top Resin forms a glossy, hard surface, which is resistant to stains. It is also used extensively as a water clear casting resin.

Please send your questions to me at norm@epoxy.com or visit our website at www.epoxy.com.


Selecting the Right Floor for a Mechanical Room

July 27, 2015

Mechanical Room Floors are very unique in their use and conditions. You have to consider the installation environment and the function of the floor. Our Mechanical Room Floor will protect the concrete, and contain any liquids that spill.

Systems used in mechanical rooms should be zero VOC. You do not want solvent evaporating from your material. Evaporated solvent could be picked up by your air handling unit sending it through your building. The best way to prevent this is with a VOC free 100% solids resin system. A resin system that is 100% solids has no solvent (or water) in it. It also means when you spread a gallon of material on your floor after it hardens you still have a gallon of material. With water-based and solvent based materials you lose half the material to evaporation.

Mechanical rooms should be chemical resistant. Typically they are top coated with Epoxy.com Product #2 Chemical Resistant Epoxy – www.epoxy.com/2.aspx. If it is a chemical feed room you can supply a list of chemicals and concentrations to the technical support department so you can make sure the #2 is chemical resistant enough.

The systems used for mechanical rooms are impact resistant. The limiting factor is the strength of the concrete substrate. Properly installed the epoxy will stay bonded to the concrete. The only way the epoxy can chip is if you chip the concrete from underneath the epoxy. You can install a thicker epoxy floor for an additional cost if you think you need still additional protection.

The systems recommend for mechanical rooms are highly abrasion resistant and will easily handle traffic up to heavy fork lift traffic. The system can be made even thicker if you have an unusual amount of abusive traffic.

When the mechanical room is over a finished space, it is suggested that a crack isolation membrane be integrated into the system. This can be done with Product #32 Epoxy Membrane System. The advantage of #32 Epoxy Membrane Resin as part of the system is 100% solids and has zero VOCs.

If the mechanical room is shut down and you can handle solvent and want something still more flexible you can use Epoxy.com Product #459 a two component, high solids, elastomeric urethane instead of or in addition to the Product #32 Epoxy Membrane above. Product #459 exhibits excellent elongation properties along with high tensile strength and tear resistance to make it an ideal crack resistant membrane for use under Product #2 and all of our other epoxy mechanical room floor coatings.

One of the primary reasons you need a mechanical room floor over finished space below is to waterproof it. The above methods accomplish the waterproofing in the center of the floor. The edges of the floor can be protective with a coving material up the wall and around pipe penetrations. That can be accomplished with Product #720 Epoxy Coving Resin System which can be used to install an integral cove base for all of our epoxy based mechanical room flooring and most of our other epoxy flooring and coating systems. This provides seamless wall to floor protection.

For more information on seamless water and chemical resistant mechanical room flooring, contact Epoxy.com Technical Support Department at 352-533-2167, or email me at norm@epoxy.com.

 


Epoxy Cold Temperature

January 29, 2015

Installing Epoxy in Coolers and Cold Temperature

Extend Epoxy Installation Season into Winter

I have spoken on this subject here before but this time of year I get a lot of calls and emails about installing epoxy in cold temperatures. Our company started out as an installation company in Vermont. Summers are very short and winters are very long in Vermont. To stay a viable company, we had to figure ways of working through the winter.

Tenting and heating areas during the winter is time consuming and expensive. The solution is found in resin products that will set in low temperatures. The most durable and cost effective options of installation at cold temperatures is Epoxy and Methyl Methacrylate.

Cold Temperature Cure Resins can also be used as a super-fast setting Resinous Mortar or Coating at normal temperatures. Our Cold Temperature Cure Resins used at normal temperature give you quick turnaround time for small jobs, or larger jobs that require a short turn-around time.

Cold Temperatures Epoxies

Cold Temperature Cure Epoxy Resins allow installation to be done at low temperatures as low as 35°F., expanding your epoxy coating and epoxy flooring installation season. Epoxy.com Cold Temperature Cure Epoxy Resins can also be used in cold storage areas like food processing areas, where the temperature cannot be raised higher than 35° F or so. Normal cured epoxy typically requires 50°F or more.

Depending on how you mix the aggregate into the products below, they can be used as a mortar for overlays, or a grout for sealing between other hardened construction materials.

Commonly Used Cold Temperature epoxies

Product #1 Cold Temperature Cure Epoxy Coating is 100% solids and specially formulated coatings for cold temperature applications. Cold Temperature Epoxy Coating #1 is able to cure at temperatures as low as 35°F. It is has Zero (0) VOCs. Since it has no VOCs, it has no solvent so it meets the strictest possible standard for a low VOC coating. It is often used in coolers and food preparation areas that require constant low temperatures. Product #1 Cold Temperature Cure Epoxy Coating is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.

Product #10 Cold Temperature Curing Epoxy Mortar Resin – This product has a low modulus of elasticity (flexibility) and is Low Viscosity. The low viscosity allows heavy loading of the right fillers. The heavy filler loading helps not only to save money, but helps to maintain better thermal coefficient with respect to concrete and steel. The low modulus of elasticity prevents it from being brittle making it less vulnerable to thermal coefficient differences. It also gives it better impact resistance.

You can find more information on cold temperature cured epoxy at: http://www.epoxy.com/EpoxyColdCured.aspx.


Poured Concrete Basement Waterproofing with Epoxy

September 18, 2014

This is the second half of a 2 part of a series on basement waterproofing with epoxy. In Part 1, we discussed waterproofing block wall foundations with epoxy. In Part 2A we discuss how to identify leaks that need waterproofing in basement walls, and floors that are made out of poured concrete. In this part (2B) will deal with epoxy injection repairs of cracks in poured concrete, that cause the leaks.

Earlier we discussed how many homes and businesses experience leaky basements year after year. The worse time is in the spring and after heavy rain. We discussed prudent things that you can do to improve drainage against your foundation. Epoxy Injection is designed to waterproof and give you the concrete’s structural integrity back.

Why Epoxy Inject the Cracks?

We discussed in our last article that cracking is a sign of failure caused by stresses, inadequate design, improper curing, etc. One of the dangers of a structural crack is the effect that it has on the reinforcing bar. The reinforcing represents one of the main structural values of the concrete. Cracks left unprepared allow water to enter your basement and attack the rebar.

Epoxy injection resin has two purposes:

  1. It effectively seals the crack to prevent the damaging moisture entry. Second, it monolithically welds the structure together.
  2. The injection also stops the infiltration of water into your basement.

Epoxy Injection Port Setting

Clean the concrete on both sides of the crack being careful not to force concrete dust into the crack. Concrete dust can be detrimental to the injection processes in several ways. Vacuum the area completely with a shop vac.

You need to determine the spacing of ports to be set. The spacing is a factor of the tightness of the crack and the depth of the concrete substrate. Spacing is normally between four (4) and eight (8) inches.

Port Setting and Sealing

Align ports directly over cracks. That allows injection resin to flow into the crack. Seal surface cracks and the ports in place. Sealing the exterior of cracks is done with Epoxy Gel #2006.

Selecting the Right Epoxy Injection Resin

Epoxy injection resin should typically be low viscosity injection resin- Epoxy Injection Resin #301. It must be low viscosity resin so it will flow in the smallest hair line cracks. Resin can travel several feet from the point of injection. It may take some time before reaching the next port or penetrating through pin holes in the surface. Epoxy injection effectively fills cracks including small voids and hairline cracks

Pumping Epoxy Injection Resin

The most economical way to deliver the epoxy injection is with the 450 ml binary injection system, a manual gun, or the pneumatically driven one. This uses a binary caulking gun with static mix tubes to inject the resin, insuring continuously mixed fresh material.

Limit pressure, low pressures allow gradual resin flow into the crack for deeper penetration. Start injection at the lowest point, and continues upward on the crack area. While injecting the lowest port, resin will flow to and out of the next higher port.

When pure resin is flowing out the next port cap, plug the current injection port and move to the next port. Then injection continues in the port showing resin flow. This procedure continues until all ports are full.

CONCLUSION

Epoxy injection is very effective at repairing concrete cracks and cutting of water infiltration. The right resin and equipment is critical. Epoxy injection makes a crack watertight while restoring the original structural integrity intended for the concrete. You can get all of the material you need to do this by contacting us:

321-206-1833 Customer Service – Ordering and Order Status
Katey Fontaine, VP – Customer Service Director
sales@epoxy.com

Technical Support
352-533-2167
Norm Lambert, President
Technical Support Director
info@epoxy.com

Additional Resources

http://www.epoxy.com/injection.aspx


Basement Waterproofing with Epoxy Part 2A

September 15, 2014

Poured Concrete Foundation Waterproofing

This is number 2A of a 2 part series on basement repairs. In Part 1, we discussed waterproofing block wall foundations. In Part 2A shows how to identify leaks that need waterproofing in basement walls, and floors that are made out of poured concrete. Part 2B will deal with the actual repairs to poured concrete leaks.

In our last piece we discussed how many homes and businesses experience leaky basements year after year. The worse time is in the spring after winter accumulation of snow. There are a number of prudent things that you can do to improve drainage against your foundation like roof gutters, grading and improvement of drainage. The recommendations here do not replace that conventional wisdom. It is designed to augment and improve upon these conventional methods.

Identifying the Source of the Basement Water Leak

The nice thing about poured concrete is that it holds water back very well. The leak typically happens at a cold joint or in a crack or hole in the concrete.

Concrete Cold Joints

Fresh (plastic) concrete doesn’t bond to hardened concrete. The exception is when a special epoxy bonding agent like Epoxy.com Product #2007 – is used (this bonding agent will be discussed in a future article). When concrete has hardened or has started to harden and you pour more concrete against it (without the right bonding agent) you get what is called a cold joint. These cold joints are a common source of water leaks.

Virtually all basements are built with a giant cold joint – the cold joint between the floor and the wall. Typically there is some sort of water-stops material installed in these joints intended to stop leaking at this cold joint. These water-stops can fail. So the wall to floor joint in a concrete basement is a frequent source of water leaks.

You can also get cold joints in the middle of concrete walls and floors due to multiple pours. You can get cold joints if concrete is setting to fast and fresh concrete is poured against semi cured concrete. Sometimes saw cuts in the floor can be a source of leaks

Form Ties

Then there are the ties that go through the concrete to hold the forms together on either side during the pour. If these form ties are not installed perfectly or if the concrete is not totally vibrated around them, these ties can act as a conduit to let the water in.

 

Wall and Floor Cracks

When concrete cures it shrinks that is called “plastic shrinkage”. That plastic shrinkage can and usually does result in the concrete cracking. These cracks are one of the easiest ways for water to get into your basement. If the water makes it to the fill side of the tank (under the floor or against the wall) it will typically leak out into your basement. You should look carefully for these cracks when looking for potential leaks into your basement. If you are able to investigate into the water infiltration into your basement when it is leaking it will be easy to see. If trying to find the source of leaks when the basement is dry you have to look for water marks on either side of the cracks and beneath the areas that might be leaking.

Repairing the Basement Leaks with Epoxy

In the next installment on this topic, I will deal with how you waterproof the cracks while structurally repairing them with epoxy and similar materials.

For more information please contact me:

Norm Lambert
norm@epoxy.com
352-533-2167
www.epoxy.com

 


Seamless Epoxy Flooring Systems Explained

August 25, 2014

Epoxy.com offers many different types of seamless flooring. We offer so many kinds that sometimes it confuses people. The purpose of this article is to explain the differences, and to help you choose the right epoxy seamless flooring system for your application. In some cases the right seamless flooring system will not even be an epoxy. It may be polyurethane or Methyl Methacrylate (MMA).

Epoxy.com Epoxy Chip Flooring in VT rest area.

Epoxy.com Epoxy Chip Flooring on a VT Interstate Rest Area – Taken over 15 years after installation.


Epoxy Floor Coatings

Epoxy coatings can be effective flooring systems. Using Epoxy as a flooring system you need a 100% solids, zero voc, hard durable coating. You also want a coating that is available in multiple colors. These floor coatings can last for decades, so you want to pick a color that you like. Properly installed you will be looking at this floor coating for a very long time. This kind of flooring system is available in the following options:

  1. Epoxy.com Product #1 – www.epoxy.com/1.htm – meets all the criteria above. It has good chemical resistance, and excellent cost to benefit ratio. Great for warehouses, in areas with high traffic and only modest chemical exposure.
  2. Epoxy.com Product #1ESD – www.epoxy.com/1esd.aspx. This is the same as product #1 above but has conductive filler in it. Depending on the primer you use under this system it can be conductive (100,000 – 1,000,000) ohms of resistance or Electro-Static Dissipative (ESD) which is 1,000,000 to 1, 000,000,000 ohms. Used in plants that produce explosive materials like ammunition, fireworks, flairs, or explosive solvents, and used in areas of sensitive electronics, like computer server buildings, avionics, electronics assembly and electronic production areas.
  3. Epoxy.com Product #2 – www.epoxy.com/2.aspx. This is similar to product #1 but with a much higher chemical resistance. This major increase in chemical resistance is offset by only a small increase in the cost of the #2 over the Product #1. The product #2 is well suited for applications like garages, machine shops, sewer tank floors, battery rooms, cooling towers, grooming shops, dog kennels and all areas where an economical chemical resistant coating is required.
  4. Epoxy.com Product #633 – www.epoxy.com/633.aspx – is a highly chemically resistant epoxy floor coating and flooring system. Like Product #1 and Product #2 is extremely durable. Product #633 is typically used in areas where containment of aggressive chemical is imperative. For example Product #633 will hold up to continuous exposure of 98% Sulfuric acid for a period of at least 6 months without loss of structural integrity. Great for secondary containment for a large number of chemicals.

     

All the systems above can go over many different types of substrates with the proper surface preparation. All of the products above are available in 17 colors and can be color matched for an additional cost. The systems above can be combined with various anti-skid materials or broadcast with silica broadcast aggregate to produce a thicker floor

 

Chip Floor

Epoxy.com Chip Flooring – www.epoxy.com/chips.aspx – is the perfect blend of economy, durability, low maintenance, and gorgeous appearance. It uses a 100% solids pigmented epoxy base coat, a full broadcast of plastic chips, and two coats of chemical resistant clear glaze. The chemical resistant glaze also makes this easily the most non-yellow epoxy top coat available today. This easy to clean chip flooring system is best for high traffic areas where appearance, durability and low cost of ownership is a must. Great for commercial and residential kitchens, bathrooms, showers, grooming shops, kennels, veterinary clinics, garage floors, show rooms, rest areas, and much more. This product can be installed with an integral cove base. Epoxy.com Chip Flooring can be installed by a contractor but easy enough to be installed by a home owner. Epoxy.com Chip Flooring can be installed in a residence but is rugged enough to be used in the most demanding commercial applications.

Quartz Flooring

Quartz Flooring Product #15 – www.epoxy.com/15.aspx has a long history of being durable, attractive and non-yellowing. I personally installed this product on high school bathroom floors in the mid 70s. These floors have held up to the test of time with little or no wear, little or no loss of shine and little to no yellowing even under the urinals. This is also available with an integral cove base

Solid Colored Flooring

These solid colored floors are based around self leveling, trowelable or double broadcast application techniques. These floors are sometimes called shop floor. They are made to be thick and extra durable under extremely harsh environments. They can be top coated with any of the systems above under coatings. This kind of flooring is available in 3 speeds of cure: normal, fast, and cold cure. Solid colored flooring is also available with an integral cove base.

Methyl Methacrylate (MMA) Flooring

The big advantage of MMA is speed of curing. Each coat of MMA will cure hard to the touch in 1-2 hours. This allows the next layer to be applied quickly and traffic to be returned to it quickly. You can even build a fast setting integral cove out of MMA resin.

I personally installed MMA on one kitchen floor with a very tight schedule. The restaurant was only closed for breakfast. The project started with rotten plywood floors. At 10 PM the carpenters came in to work. They removed rotten floor and floor joists. They replaced the floor joists and the plywood. At 5 AM I went in with my crew and we primed the floor and sealed up the joints in the wood and the screw holes. At 6:30 AM we laid the floor. At 8 we put a glaze coating on the floor and by 10:30 the restaurant workers were on the floor prepping for lunch. The floor installation from start to traffic took just 5.5 hours.

Polyurethane Decking Systems

Polyurethane Decking – http://www.epoxy.com/elastomeric.aspx – is the system best used in areas where maximum flexibility is necessary. This is typically outdoors, waterproof applications like balconies.

Specialized Flooring

We have a number of systems that are specialized flooring like conductive and ESD (Electrostatic Dissipative) flooring – www.epoxy.com/conductive.aspx – and various hybrid systems. If your project does not seem to fit in the categories above email me at norm@epoxy.com or call us at 352-533-2167.

 

In conclusion we offer many types of seamless flooring systems, they can be used for commercial and residential applications. These systems are durable, economical, and easy to install even by homeowners. These seamless flooring systems may be made out of epoxy, polyurethane, or methyl Methacrylate (MMA). Seamless flooring systems are available in multicolored or solid colored. They range in chemical resistance from very good to resistant to aggressive chemicals. When in doubt what is right for your project send me an email at norm@epoxy.com or give me a call at 352-533-2167.


Waterproof Your Life

August 7, 2014

The Concept

About 20 years I had a half way house that came to me and wanted a virtually indestructible waterproof group bathroom. They needed it to be like a shower enclosure for the entire bathroom, and toilet facility. It needed to be easy to thoroughly clean and disinfect.

The resulting system allows you to hose down the entire ceiling, wall and floors. The system that we developed is a completely seamless, waterproof ceiling and coating system. This epoxy ceiling and wall coating is seamlessly integrated with a seamless flooring system. This system is now being used for everything from clean rooms to animal facilities to car washes, daycare centers, assisted living facilities, food processing facilities and more.

The System

Ceiling and Walls

Prime the ceiling and walls with Epoxy.com Product #899 Primer – www.epoxy.com/899.aspx. Product #899 Primer is a 100% solids, low viscosity, moisture tolerant epoxy. It soaks deeply into the substrate, verifies surface preparation, and helps to prevent the much thicker coating from getting bubbles that may be cause by air or moisture trying to escape from the substrate during curing. Allow primer to get hard to the touch.

Before the epoxy primer is 24 hours old (and after the primer is hard to the touch) apply a coat of Epoxy.com Product #1W. The 1W – Wall Coating is 100% solids. It comes in a range of different colors. This means it is zero (0) VOC with no solvent. Just like the 899 Primer the 1W has very little odor. We have even more chemical resistant wall coatings for applications where it is chemicals that are being splashed or sprayed. Contact us if you have strong chemical exposures that you want to contain instead of water.

Let the first coat harden to the touch and before 24 hours add another coat of #1W. Allow the coating to dry over night.

Seamless Epoxy Cove – Optional

Typically the cove is only installed if you are going to install one of the multi-colored flooring systems (Waterproof Floor Options 2 & 3below). Cove is covered in an earlier blog – https://news.epoxy.com/2014/06/25/seamless-epoxy-cove-installation-instructions/. The cove gives you a radius at the bottom of the wall making the floor to wall transition easy to clean and esthetically pleasing.

Seamless Epoxy Flooring System

There are multiple systems that you can use for your seamless flooring portion of the system.

Water Proof Floor Option 1 – Seamless Epoxy Floor coating:

Floor Coating Systemwww.epoxy.com/1.htm. Product #1 applies with the Product #899 primer under it and in 2 coats just like the 1W. The Product #1 is thinner and flattens better on a floor than the Product #1W. You can also add an optional anti-skid to the #1 Floor Coating. The #1 comes in all the variety of colors of #1W.

Waterproof Floor Option 2 – Seamless Epoxy Chip Flooring:

Chip Flooring Systemwww.epoxy.com/chip.aspx is a two component 100% Chemical Resistant Epoxy Chip Flooring. System #315 Seamless Epoxy Multi-Colored Chip Flooring is available in virtually limitless color combinations. If your job is big enough our chips can be pigmented to match all the colors of many major paint companies. We can color match our base coat colors as well. Unless the pigments for your custom colored 315 Basecoat are unusually expensive we can color match for a modest small batch charge or at no charge for larger orders. Even our standard color pallet offers you over 45 chip colors that can be blended in any combination and percentage as you want. This gives you the architectural choices you need. The top coating for this system is highly UV resistant so since it doesn’t chalk indoors it can last and look great for decades.

Waterproof Floor Option 3: – Seamless Epoxy Quartz Flooring:

Quartz Flooring System with Product #15 – www.epoxy.com/15.aspx – is also an excellent flooring system for those who like the colored sand look with a good midrange chemical resistant system.

Waterproof Floor Option 4 – Seamless Chemical Resistant Flooring:

We can also help you to combine the systems above with our Novolac Epoxy Systems – www.epoxy.com/novolac.aspx for highly chemically resistant versions of those systems. You can also install an Electro-Static Dissipative or Conductive system www.epoxy.com/conductive.aspx.

 

In conclusion the systems above are only a small fraction of the possibilities. With our wide range of colors and chemically resistant systems the possibilities are endless. Please contact Epoxy.com Technical assistance at 352-533-2106 or email me directly at norm@epoxy.com.


%d bloggers like this: