Chemical Resistant Flooring

September 10, 2019

Epoxy and Chemical Resistance

All our epoxy products have good chemical resistance in every day situations.  The products listed below are for projects where flooring materials must have medium chemical resistant to highly chemical resistance. These highly chemically resistant epoxy and similar materials are primarily designed for secondary chemical containment, but are also useful on production lines and in laboratories where there is a chance of chemical spill. Applying highly chemically resistant epoxies to your secondary containment can protect your structure, protect the environment, and make economic sense.

We offer a large variety of chemical resistant products, that cover a wide variety of situations.  Our chemical resistant systems are used for a wide variety of projects. Consult with Epoxy.com Technical Support Department for more details.

Highly Chemical Resistant Epoxy Coatings and Novolac Epoxy Coatings

Novolac Chemical Resistant Epoxy Coating Product #633 epoxy is specifically designed to provide increased levels of thermal stability and chemical resistance.  Chemical Resistant Novolac Epoxy #633 is a 100% solids chemical resistant epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It can be used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. This chemical resistant epoxy Novolac coating is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Novolac Epoxy Coating Product #633 is commonly used as a seal coat for Epoxy MORTAR SYSTEMS where chemical resistant performance is required. 

Chemical Resistant Epoxy and
Chemical Resistant Urethane Flooring

Chemical Resistant Epoxy Flooring Resin Product #15   is a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or Chemical Resistant Epoxy Flooring Resin Product #15 to produce a durable, easy to maintain floor, on both new and old surfaces. Chemical Resistant Epoxy Flooring Resin Product #15 has superior clarity and UV stability. Zero (0) VOC Epoxy. 

2 Component Chemical Resistant Polyurethane Coating Product #402 is a two component chemical resistant polyurethane coating with gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. 2 Component Chemical Resistant Polyurethane Coating Product #402can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. 2 Component Chemical Resistant Polyurethane Coating Product #402 is not for use in California Use Product #406 – Two Component Low VOC Chemical Resistant Urethane Coating when a California Compliant low VOC product is required, or desired.

Chemical Resistant, Polyurethane Coating – Product #406 is a two component, . Chemical Resistant, Polyurethane Coating – Product #406 is a low VOC compliant urethane that meets all federal and state environmental air quality standards. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.Chemical Resistant, Polyurethane Coating – Product #406 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Chemical Resistant, Polyurethane Coating – Product #406 can be used as a finish coating option for most Epoxy Flooring Systems.

Chemical Resistant Conductive Flooring Product #629 is a 100% solids epoxy Novolac Conductive coating ideal for severe chemical and solvent storage requiring conductive and spark proof surfaces. Applied at a nominal 1/16 inch, the Epoxy.com Product #629 Chemical Resistant Conductive Flooring offers the superior chemical resistance of a Novolac Resin System while maintaining a conductive surface.

Epoxy Novolac Coating / Novolac Epoxy Mortar Binder Product #630  – a 100% solids epoxy chemical resistant Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. Epoxy Novolac Coating / Novolac Epoxy Mortar Binder Product #630 is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Zero (0) VOC Epoxy. 

Chemical Resistant Novolac Epoxy Control Joint Filler Product #632 is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade. Epoxy Novolac Coating / Novolac Epoxy Mortar Binder Product #630  is Zero (0) VOC. 

Novolac Epoxy Highly Chemical Resistant Coating Product #633  is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. It is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Novolac Epoxy Highly Chemical Resistant Coating Product #633 is commonly used as a seal coat for EPOXY MORTAR SYSTEMS where chemical resistant performance is required.  Zero (0) VOC Epoxy. 

Highly Chemical Resistant Joint Sealers

Chemically Resistant Control Joint Filler Epoxy Novolac Product #632   is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade. Zero (0) VOC Epoxy. 

Flexible Polyurethane Methyl Methacrylate (PUMMA) – Product #6890 is a higher viscosity, 100% reactive, flexible methyl methacrylate polyurethane hybrid resin used as a crack isolation or waterproofing membrane under various Epoxy.com MMA Systems, or as a resilient mortar or joint filler for numerous applications.

Vinyl Ester and Novolac Vinyl Ester Systems

Universal Primer for Vinyl Ester Systems Product #660 – used as a primer for Epoxy.com Novolac Vinyl Ester and Vinyl Ester Systems. is a one component, moisture cured polyurethane aluminum filled primer and coating. Its low viscosity, high “wetting” characteristics, and creep, undercutting, and blistering resistance make Epoxy.com Product #660 Universal Primer and Finish a superior primer and finish coat. Epoxy.com Product #660 Universal Primer and Finish undergoes a rapid molecular weight change as it polymerizes into a high molecular weight finish with excellent corrosion and abrasion resistance.

Chemically Resistant Vinyl Ester Binder and Adhesive Product #661  is a clear, 100% reactive, vinyl ester novolac used to coat or line concrete or steel surfaces in chemically aggressive industrial environments. It is used for coating primary and secondary containment, trenches, troughs, pump pads, and equipment.

Product #662 – Vinyl Ester Aggregate.

Chemical Resistant Vinyl Ester Coating Product #663  is a 100% reactive, vinyl ester novolac used to coat concrete or steel surfaces in chemically aggressive industrial environments.  Due to its high molecular weight and low permeability, it will withstand exposure to bond range of acids, caustic and solvents. Chemical Resistant Vinyl Ester Coating Product #663 is designed as a coating for secondary containment, trenches, troughs, pump pads, equipment and structural members. Low Temperature accelerators are available for positive cure at temperatures down as low as 33° F.

General Purpose Epoxies Good Chemical Resistance

Chemical Resistant Epoxy Coating Product #2   is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure. Also available fast, and Cold Temperature Cure versions. Zero (0) VOC Epoxy. 

Chemical Resistant Epoxy Wall Coating Product #2W    is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Zero (0) VOC Epoxy. 

Chemical Resistant Polyurethane Coating 2 Component – Product #402 is a two component chemical resistant polyurethane coating with gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. Product #402  – 2 Component Chemical Resistant  Urethane Coating can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. Product is not for use in California.

Related Topics:

Epoxy Coatings

Epoxy Primers and Sealers

Epoxy Chemical Resistance Chart

Information Needed About a Project to Select the Right Chemcial Resistant Epoxy


Epoxy Mortar Installation

June 19, 2019

Epoxy.com Mortar Systems can be used to make permanent repairs that no other kind of product can make. The purpose of this blog is to give you an overview of what you can use and how to use it.

  1. Product Selection –  The following are a list of Epoxy.com Products that make excellent epoxy mortars  All the products listed below are zero (0) VOC, so it meets even the strictest low VOC requirements, and meets Indoor Environmental Quality/Air Quality (LEED IEQ 4.2 Indoor Emitting Materials Credit). See the individual product component technical data sheets and MSDS for further information.
  2. INSTALLATION:
    • First and foremost is good surface preparation.  Good surface preparation is necessary for most if not all patches to have long term success: www.epoxy.com/surfaceprep.aspx.
    • Prime the bottom of the whole with some of the neat mortar resin. Neat mortar resin is the liquid (A&B) mixed at the proper mix ratio and stirring in a way to insure a completely mixed product.  This will typically take about 3 minutes.
    • Mix some of the neat epoxy into the Epoxy.com Mortar Blend Aggregate #82 or other appropriate dry clean silica sand gradation.
    • The amount of sand aggregate depends on the aggregate used. 
      • Typically, the Epoxy.com Product #82 Mortar aggregate can be added at a rate of 18 to 27 lbs. of #82 per 1.5 Qt of mixed resin (1Quart of A to ½ Quart of B).
      • You will need to recalculate the sand above when using a different sized batch. This is doubly true if using one of or 4:1 mix ratio material.
      • Shallow patches tend to be a smaller amount of sand filler.
      • Deeper patches tend to be on the higher side.
      • If you get a lot of resin to the surface your mix is too wet.  If your mixture after it hardens is porous, or weak then you have added too much aggregate.
      • For a better finish in very deep pours do it in 2 lifts. 
        • Fill all but the last ¼ inch plus or minus with your dryer mix. Allow to cure hard (typically overnight).Fill with a wetter mix on top of that after the first one has cured.
        • To ensure proper adhesion between layers never wait more than 24 hours between layers.
      • It is always better to have your patch slightly higher rather than to low.  If you are slightly high you can grind the patch back to level. If to low you will need to fill again. 
    • For very shallow fills (1/32 or so) where the sand particles are to large you can use any of the following:

As always, when in doubt contact me at Epoxy.com Technical Support with your questions.

norm@epoxy.com
1-352-533-2167


Epoxy Stone Maintenance.

May 16, 2019
Picture of Epoxy.com stone
Epoxy.com Epoxy Stone

A customer asks, “I have a patio with Chattahoochee or Chattahoochee like stone glued together with epoxy. It is no longer shinny and the stone is starting to come loose. What is causing this and what should I do about it?”

It sounds like you have a stone that was installed with Epoxy.com Product #17 – www.epoxy.com/17.aspx – or some other brand of stone adhesive. We tell all of our customers that install epoxied stone that they need to maintain by re-glazing it periodically. Unfortunately, not everyone is as forthright as us in telling their customers this.

We recommend you take these steps every spring and fall so you can enjoy your epoxied stone year-round.

1. Look at you epoxy stone and look determine if it needs maintenance. If it is still shinny and you don’t have loose stone, then you are done. Come back and do this step again in 6 months.

2. Clean your stone to remove algae, mold, oil, grease and any other contaminants from it. Typically, contamination is just algae and mold and can be removed with a weak Clorox and water combination with a thorough rinse with a hose or gentle pressure wash. Allow your stone to dry completely before proceeding.

3. Determine if it has only lost its shine or if you have loose stone. Decide if sections of the stone are so loose that they need to be reinstalled with Product #17 (4 below) or if there are just a few to no loose stones and you just want to re-glaze it (5 below).

4. If stone needs to be picked up and reinstalled in areas do that with Epoxy.com Product #17. Contact Epoxy.com Technical support for the amount of product you need. We can also go over the reinstallation of these areas with you. If the stone is sound or has just a few stones that you are not worried about replacing you can proceed to 4 below.

5. Apply 1-2 coats of Epoxy.com Product #15 (depending on how bad the stone has weathered) to the top of your clean dry stone. This will give you back your original shine and strengthen the interface (bond line) between the stones. Product #15 is the best product to do this with as experience has shown it lasts 1.5 to 2 times longer than convention epoxies used for this application.

6. CAUTION: You can find single component so called “Chattahoochee” . These sealers add shine to your epoxy stone but do not strengthen the interface between the stone. Using this kind of sealer can ruin your epoxy stone. Once these inexpensive sealers are on they are difficult to impossible to remove. Making it optionally impossible to ever re-glaze the epoxy stone properly again.

As always when in doubt contact Epoxy.com Technical support at info@epoxy.com or by calling 352-533-2167.


Epoxy on 316 Stainless

November 16, 2018

A customer writes:

“I’m an architect with a project under construction…

“There is a hazardous materials room in the building where various corrosive products will be stored. The materials are stored in the middle of the room on a large collection pan and the entire floor below that is constructed of stainless steel bar grating – held up off the concrete slab.

“Per the direction of the engineers we have required the contractor to essentially coat all the surfaces in the inside the room with your epoxy Novolac 633

“Now a question has come up about whether or not the 633 will adhere to stainless steel bar grating made from 316 stainless?

“Could you address that for us?”

My Answer:

That is an excellent question.  316 Stainless is very hard to bond to.  Many of our customers have had excellent luck with the following procedure however.

  1. If possible sandblast the stainless to get a profile.  If that is impossible grind/sand it the very best you can to create small scratches everywhere and remove the shine.
  2. Coat with Epoxy.com Product #660 Aluminum Filled Primer – www.epoxy.com/660.aspx . Allow to cure hard to the touch
  3. Apply 2 coats of Epoxy.com #633 or. 633W (Wall Grade).

For more information Contact:

Norm Lambert
norm@epoxy.com
352-533-2167

or visit www.epoxy.com 


%d bloggers like this: