Epoxy.com Product #695
Methyl Methacrylate Hardener (Hardening Powder – BPO)
Description
Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring
Systems is for use with Epoxy.com Products #691, #692, #693,
#697, #698 & #699. Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems dosing can be changed due to temperature and desired set time / working time.
Epoxy.com Product #695 must be well mixed with Epoxy.com MMA before adding any
other aggregates and fillers. After mixing the Epoxy.com Product #695
Hardening Powder into Epoxy.com MMA the polymerization reaction which
leads to the hardening of the MMA begins.
Composition
Epoxy.com Product #695 is a white dry powder consisting of 50% BPO,
Dibenzoylperoxide.
Technical Data |
|
| Appearance | Sandy, white dry powder |
| Content of Dibenzoylperoxide andDicydohexlphtalate | Approximately 50% |
| Self-accelerating decomposition temperature | 140° F |
| Self-ignition temperature | >680°F |
| Solubility | Not soluble in water |
Packaging |
|
|---|---|
| 5 lbs | 1gallon Pail |
| 15 lbs | 3 gallon Pail |
| 55 lbs | Box |
Use
Epoxy.com Product #695 MMA Hardener Powder must be mixed just immediately
before the application of Epoxy.com MMA. All other powders and fillers must
be added after
Epoxy.com Product #692 and the Epoxy.com MMA resin have been well mixed
together. A dosing chart is shown below. Be sure to double check with
the individual technical data sheets for the Epoxy.com MMA you are mixing
with Epoxy.com Product #692.
Caution
Epoxy.com Product #692 is an oxidizing agent that violently decomposes
under the influence of heat or when it comes in contact with deducing
agents. Do Not mix With Accelerators.
Store separately from Epoxy.com MMA resins. Review MSDS information
completely before using this or any other Epoxy.com Products.
Storage
Store in tight containers in dry environments below 80°F.
Mix Ratios
| PRODUCT | SUBSTRATE/MATERIAL TEMPERATURE (°F) | Epoxy.com Product #695 MMA Hardener (BPO)VOL OZ.PER GALLON OF RESIN |
| #691 MMA Primer | 30°F | 12.7 |
| 40°F | 9.0 | |
| 50°F | 7.5 | |
| 60°F | 5.5 | |
| 70°F | 3.5 | |
| 90°F | 1.8 |
| #692 MMA Flexible Membrane | 40° F | 8.0 |
| 50°F | 7.0 | |
| 60°F | 5.0 | |
| 70°F | 5.0 | |
| 90°F | 3.0-4.0 |
| Epoxy.com #693 MMA | 40°F | 5.5 |
| 50°F | 4.5 | |
| 60°F | 3.5 | |
| 70°F | 2.0 | |
| 90°F | 1.0-2.0 |
For more information Contact:
Norm Lambert
President &
Director of Technical Support
Epoxy Systems, Inc
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
352-533-2167 (Voice)
352-465-3497 (fax)
norm@epoxy.com
[Catalog of Products]
[Where to Start]
[Guide Specs]
[Epoxy Installation Guides]
[Epoxy Bonding Systems]
[Chip Floors]
[Chemical Resistant Epoxy]
[Seamless Coatings] [Conductive Epoxy Flooring]
[Crack Injection of Concrete & Wood]
[ Epoxy Applications]
[Elastomeric Polyurethane Systems]
[Seamless Garage Flooring Resins]
[High Temperature Resins]
[Seamless Industrial Floors] [Joint Systems & Sealants]
[Methyl Methacrylate MMA ]
[Novolac Epoxy Resins]
[Epoxy Mortars & Grouts]
[Primers Sealers]
[Seamless Flooring]
[Waterproofing]
[Dealers Wanted]
[Epoxy Installation Tips]
[Who We Are]
Epoxy.com News and Tips 
Thanks for the information. I would surely get back to you guys for help and services.