Concrete Crack Healer & Sealer

February 9, 2017

Repair Cracks in Bridge Decks

And Similar Horizontal Concrete Surfaces

Low Viscosity Fast Setting Methyl Methacrylate (MMA)

Permanent Crack Repair System

MMA CONCRETE CRACK HEALER and SEALER Product #684LV is a 100% reactive ultra-low viscosity methyl methacrylate resin used as a penetrating crack sealer or to fortify extremely porous concrete substrates. MMA CONCRETE CRACK HEALER and SEALER Product #684LV is typically used on bridge decks, parking structures, concrete floors or as a general penetrating sealer to prevent moisture intrusion.

MMA CONCRETE CRACK HEALER AND SEALER Product #684LV is a reactive methacrylate resin, which hardens rapidly with the addition of Product #695 MMA HARDENER, even at low temperatures.

ADVANTAGES

  • Fast Cure (60 min.) for Rapid Recoat and Return to Service
  • Ultra-Low Viscosity for Excellent Absorption Into Concrete
  • Protects Against Water Penetration
  • VOC Compliant (100% Solids)
  • Full Strength in 1 Hour
  • Use Over Wide Temperature Range – Even Below Freezing – Adjust for Temperature in the Field

CONSIDERATIONS

  • Substrate must be dry and free of dirt, waxes, curing agents and other foreign materials.
  • Should not be installed on fresh concrete until maximum shrinkage has occurred (at least 30 days after placement).

COMPOSITION

MMA CONCRETE CRACK HEALER and SEALER Product #684LV is a 100% reactive methyl methacrylate resin. Color is supplied is clear.

USES

  • Bridge Decks
  • Containment Structure Floors
  • Plant Floors
  • Concrete Slab on grade
  • Suspended Concrete Slab
  • Virtually any horizontal concrete surface

For more information about repairing infrastructure visit our website at: http://www.epoxy.com, email us at info@epoxy.com or phone technical support at +1 (352) 533-2167


Epoxy.com Resin Products and Systems

April 4, 2014

Today’s Resin

The Right Resin System for the Right Job


We want you to have the “Right Resin Product for the Right Job”, so we are always looking to improve our systems with new epoxy technology and new epoxy resin formulations. Today we are featuring a Methyl Methacrylate MMA not an epoxy.  We are not just about epoxy but we want you to have the right resin system for your job.

 

MMA Concrete Crack Healer and Sealer

684LV – MMA CONCRETE CRACK HEALER and SEALER replaces Epoxy.com Product #685.  MMA CONCRETE CRACK SEALER Product #684LV is a 100% reactive ultra-low viscosity methyl methacrylate resin used as a penetrating crack sealer or to fortify extremely porous concrete substrates. MMA CONCRETE CRACK SEALER Product #684LV is typically used on bridge decks, parking structures, and floors or as a general penetrating sealer to prevent moisture intrusion.

One of the major advantages of MMA CONCRETE CRACK SEALER Product #684LV is its very low viscosity.  It is about the viscosity (thickness) of diesel fuel, so it soaks into the concrete and down into small cracks quickly.  It hardens in about an hour.  When it hardens it hardens with a bond strength to clean concrete that is greater than the tensile strength of that concrete.  In other words you have just chemically welded the two sides of the crack together, so that it is as if the crack had never happened.

The very fast setting time allows you to install you flooring or sealer system the same day that you repair your crack. At Epoxy.com we are all about systems.  Combining the right resin product to create the right system for your job.

 


<span>%d</span> bloggers like this: