Cold Temperature Epoxy
Installing Epoxy on Garage Floors in Cold Temperatures
Extend Epoxy Installation Season into Winter
It is that time of year again when I start getting a lot of calls and emails about installing epoxy in cold temperatures.
The best time to protect your floor is before it sees any salt at all. If you have a new garage floor now is the time to protect it. It is still possible to do older floors but the more salt it sees the more difficult and expensive it can be.
The night temperatures are dropping this time of year. It is still possible to coat your garage floor before temperatures drop too low. Our cold temperature epoxies will cure with substrate temperatures as low as 35 degrees F, although it will set a lot faster at 40 degrees F.
Protecting your garage floors is especially important in areas that will see salt from roads or ocean spray. You will want to protect your garage from the ravaging effects of salt deterioration. Without protecting your floor salt will damage your garage floor and make for very expensive repairs later if it is not well protected.
It is not too late to protect your floor even in cold climates if you move quickly now. Without this protection your garage floor will not be as nice come spring as it is now. The damage that takes place is not only aesthetic but structural.
Cold Temperatures Epoxies
Cold Temperature Cure Epoxy Resins allow installation to be done at low temperatures as low as 35°F., (although it sets a lot faster at 40°F) expanding your epoxy coating and epoxy flooring installation season. Epoxy.com Cold Temperature Cure Epoxy Resins can also be used in cold storage areas like food processing areas, where the temperature cannot be raised higher than 35° F or so. Normal cured epoxy typically requires 50°F or more.
Depending on how you mix the aggregate into the products below, they can be used as a mortar for overlays, or a grout for sealing between other hardened construction materials.
Commonly Used Cold Temperature epoxies
Product #1 Cold Temperature Cure Epoxy Coating is 100% solids and specially formulated coatings for cold temperature applications. Cold Temperature Epoxy Coating #1 is able to cure at temperatures as low as 35°F. It has Zero (0) VOCs. Since it has no VOCs, it has no solvent so it meets the strictest possible standard for a low VOC coating. It is often used in coolers and food preparation areas that require constant low temperatures. Product #1 Cold Temperature Cure Epoxy Coating is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.
Product #10 Cold Temperature Curing Epoxy Mortar Resin – This product has a low modulus of elasticity (flexibility) and is Low Viscosity. The low viscosity allows heavy loading of the right fillers. The heavy filler loading helps not only to save money, but helps to maintain better thermal coefficient with respect to concrete and steel. The low modulus of elasticity prevents it from being brittle making it less vulnerable to thermal coefficient differences. It also gives it better impact resistance.
You can find more information on cold temperature cured epoxy at: http://www.epoxy.com/EpoxyColdCured.aspx.
Please send me your questions to me by email to firstname.lastname@example.org