Maintaining Epoxy Stone Overlays

Epoxy_Stone_Overlays
Product #17 Epoxy Stone Overlay, with mixed stone sizes

Epoxy Stone Overlays have a beautiful natural look. The Epoxy Stone Overlay looks like wet shinny rock. It allows water to flow more naturally, giving you additional drainage in areas that you are walking where you feet might get wet if it is raining or near a water source like a pool.

Epoxy stone overlays need to be reglazed from time to time.  That is true about epoxy stone overlay systems  available from us or from anyone else. In some parts of the country in the direct sunlight this could be every year.  Other parts of the country with less sun might be 5 or more years.  If you wait to long to reseal your stone it will start failing as the bond breaks down between the individual stones. The stones will then start becoming loose.  If not resealed soon enough eventially the whole system will fail. Sealing at proper intervals with the right material is the only way to prevent this.

If you don’t want a system you need to maintain, we have other (non rock) systems that require little or no maintanance.

Resealing the Epoxy Stone Overlay.

Product #15 Chemical Resistant Epoxy Floor Resurfacing System is typically used for resealing epoxy bonded stone. Product #15 Chemical Resistant Resurfacing system oxidizes much slower than other epoxies, and usually last much longer than other epoxies used for reglazing epoxied stone pebbles. You don’t want to use other epoxies that oxidize excessively unless you are willing to reglaze 1.5 to 2 times more often than with Product #15.

The Product #15 Epoxy to reseal your stone not only adds shine back but actually reinforces the connections between the stone. Never use acrylic and other sealers commonly sold at big box stores to reseal your stone. These non-epoxy sealers add shine back to the stone, but doesn’t do anything to reinforce the bond between the individual stones. Worse yet unless the single component non-epoxy sealers have totally been warn away, they will act as a bond breaker preventing future epoxy resealing from getting to the surfaces they need to get to, in order to give you your original strenth back.

Early Spring Special

Place your credit card order and authorize it on or before April 11, 2014 for Product #17 Epoxy Stone Adhesive or Epoxy.com Product #15 for Reglazing Stone and get it at 5% off from contractor pricing. You must mention the code “EpoxyMyStone”, to get this discount.

Epoxy Stone Overlays

Epoxy Stone

Installation, Repair, and Sealing of Epoxy Stone Overlays


Early Spring Special

Place your credit card order and authorize it on or before April 11, 2014 for Product #17 Epoxy Stone Adhesive or Epoxy.com Product #15 for Reglazing Stone and get it at 5% off from contractor pricing. You must mention the code “EpoxyMyStone”, to get this discount.

Epoxy Adhesive for Bonding Pebble Stone Together

Product #17 Epoxy Adhesive for Bonding Stone Overlays is a two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses of Epoxy.com Product #17 Epoxy Adhesive for Bonding Stone Overlays would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired.

Product #17 Epoxy Stone Overlays give you the beauty of a natural looking shinny stone, without the hassle of the stone needing the constant attention of loose stone. Water actually passes through the system. The #17 Epoxy Adhesive and stone give you a carpet of stone that allows the water to run down away from your feet.

Installation Product #17 Epoxy Adhesive for Bonding Stone Overlays typically uses the #17 Epoxy Stone Adhesive, and clean hard dry stone. A 3 gallon unit of Product #17 will typically mix with about 400 lbs of stone.

Glazing Pebble Stone Epoxy

Product #15 Chemical Resistant Epoxy Floor Resurfacing System  is typically used for resealing epoxy bonded stone, because it oxidizes much slower than other epoxies, and usually last much longer than other epoxies used for reglazing epoxied stone pebbles.

Epoxy.com Resin Products and Systems

Today’s Resin

The Right Resin System for the Right Job


We want you to have the “Right Resin Product for the Right Job”, so we are always looking to improve our systems with new epoxy technology and new epoxy resin formulations. Today we are featuring a Methyl Methacrylate MMA not an epoxy.  We are not just about epoxy but we want you to have the right resin system for your job.

 

MMA Concrete Crack Healer and Sealer

684LV – MMA CONCRETE CRACK HEALER and SEALER replaces Epoxy.com Product #685.  MMA CONCRETE CRACK SEALER Product #684LV is a 100% reactive ultra-low viscosity methyl methacrylate resin used as a penetrating crack sealer or to fortify extremely porous concrete substrates. MMA CONCRETE CRACK SEALER Product #684LV is typically used on bridge decks, parking structures, and floors or as a general penetrating sealer to prevent moisture intrusion.

One of the major advantages of MMA CONCRETE CRACK SEALER Product #684LV is its very low viscosity.  It is about the viscosity (thickness) of diesel fuel, so it soaks into the concrete and down into small cracks quickly.  It hardens in about an hour.  When it hardens it hardens with a bond strength to clean concrete that is greater than the tensile strength of that concrete.  In other words you have just chemically welded the two sides of the crack together, so that it is as if the crack had never happened.

The very fast setting time allows you to install you flooring or sealer system the same day that you repair your crack. At Epoxy.com we are all about systems.  Combining the right resin product to create the right system for your job.

 

How to Insure a Quality Installation of Epoxy

Epoxy Technical Support

By: Norm Lambert President and Technical Support Director

Your Successful Installation of Our Products is Our #1 goal.

When my wife Deb and I founded this company we made a promise to each other, our employees, and our customers to only provide high quality highly durable products, at an affordable cost, backed by the best technical support in the industry. Our company is a family owned company, large enough to fill any order given to us, but small enough to care about every order, even a single unit order.

Selecting the Right Epoxy Product for the Right Job

Technical support is where successful installations begin. Even the best products, at the best price are not the most affordable products if they are the wrong products for the job, or if they are installed incorrectly. Selecting the Right Product for the Right Job isn’t just a motto, it is a necessary part of a successful epoxy installation.

We look forward to your phone calls asking for our assistance in helping you select your product. We have decades of experience in our field, but you know your project the best. Together with what you know and what we know, we can find which of our products best suite your needs.

Once in a great while we have requests for which we don’t currently carry a product to successfully accomplish your goals. If we don’t have the Right Product for your job, we will also tell you that. It is the only way you can know that if we recommend a product from your description or specification, that it is the best one to suit your needs.

Dedicated Customer Service

Katey Fontaine, VP  and Chief Operations Officer and Director of Customer Service, is dedicated in doing everything she can to get your order taken quickly, and accurately. She then keeps track of the progress of each order to make sure that they get out of our facilities as quickly as possible and on to our customers who are eager to get started with their work.

Katey also works with the trucking companies that pick up the product and deliver it to you.  She has negotiated the best possible freight and ground rates so we can pass on the lowest possible shipping charges using the most reliable carriers.

Epoxy Installation Technical Support

Our technical support department’s job is just starting after you get our products in your hands.  We are dedicated to making sure that we answer all your questions clearly and accurately.  I WANT your follow up questions.  I have customers who are installing who apologize for contacting me with questions they feel are “trivial”, when in fact those questions might be the most important ones to ask for a successful high quality installation.

Our technical support staff each have decades of field and technical support experience. In most cases we have done something like, or very similar to what you are doing. So it makes it easy for us to understand your situation, and help your installation go as smoothly as possible.

The Ultimate Epoxy Selection, Ordering, and Installation Experience.

All of us here want to be sure you are delighted with your whole experience from your first phone call or email, until you are enjoying the benefits of of our products and your installation, for decades to come. We view your success as our success. Remember, your successful installation of our products is our #1 goal.

Proper mixing and installation is critical to the optimal success  of all product.  See  Installation Tips,Techdata, &MSDS for more details on our products.   Be sure to contact us with any questions and/or concerns that you  have.For more information please contact:

Epoxy.com A Division of Epoxy Systems, Inc  20774 W. Pennsylvania Ave. Dunnellon, Florida 34431 Hundreds  of Systems, Since 1980 – Over 33 years Florida & Vermont USA