It is that time of year again. If you have Epoxy Stone Overlays you know it gives beautiful natural look. The Epoxy Stone Overlay looks like wet shinny rock. It allows water to flow more naturally, giving you additional drainage in areas that you are walking where you feet might get wet if it is raining or near a water source like a pool.
As time goes by your stone will get less shinny. This is not just an esthetic issue. The
Epoxy stone overlays need to be reglazed from time to time. That is true about epoxy stone overlay systems available from us or from anyone else. In some parts of the country in the direct sunlight this could be every year. Other parts of the country with less sun might be 5 or more years. If you wait to long to reseal your stone it will start failing as the bond breaks down between the individual stones. The stones will then start becoming loose. If not resealed soon enough eventially the whole system will fail. Sealing at proper intervals with the right material is the only way to prevent this.
If you don’t want a system you need to maintain, we have other (non rock) systems that require little or no maintanance.
Resealing the Epoxy Stone Overlay.
Product #15 Chemical Resistant Epoxy Floor Resurfacing System is typically used for resealing epoxy bonded stone. Product #15 Chemical Resistant Resurfacing system oxidizes much slower than other epoxies, and usually last much longer than other epoxies used for reglazing epoxied stone pebbles. You don’t want to use other epoxies that oxidize excessively unless you are willing to reglaze 1.5 to 2 times more often than with Product #15.
The Product #15 Epoxy to reseal your stone not only adds shine back but actually reinforces the connections between the stone. Never use acrylic and other sealers commonly sold at big box stores to reseal your stone. These non-epoxy sealers add shine back to the stone, but doesn’t do anything to reinforce the bond between the individual stones. Worse yet unless the single component non-epoxy sealers have totally been warn away, they will act as a bond breaker preventing future epoxy resealing from getting to the surfaces they need to get to, in order to give you your original strenth back.