I have a concrete mechanical room floor that I want to install a waterproof coating over. It has areas under it that I do not want to get wet. Due to the vibration I want to be sure we have good crack isolation for the concrete floor as well as being waterproof. Which Epoxy.com Coating System do you recommend?
Norm Lambert:
1.Prepare the concrete properly – www.epoxysystems.com/surfaceprep.aspx.
2. If there are any random cracks, repair them with Epoxy.com Product #685 – www.epoxysystems.com/685.htm MMA Polymer Crack Healer & Sealer. This material will weld the cracks back together structurally, making it as though the cracks never happened.
3. Fill any saw cut relieve joints with Epoxy.com Product #11 – www.epoxysystems.com/11.htm 100% Solids Epoxy Joint Filler.
4. Cold joints can be saw-cut and filled with Epoxy.com Product #11. If cold joints are large enough, saw cutting may be optional. Or if the cold joints are to be non-moving you can fill them with Epoxy.com Product #685.
5. Install 1 coat of Epoxy.com Product #899 – www.epoxysystems.com/899.aspx – 100% Solids Low-Mod Low Viscosity Zero (0) VOC Epoxy Primer at a rate of 250-300 SF per gallon per coat. Allow to dry overnight.
6. Install 2 coats of Epoxy.com Product #32 –www.epoxysystems.com/32.aspx – Epoxy.com Product #32 100% Solids Flexible Epoxy Membrane – Crack Isolation Epoxy. Allow to dry overnight after both coats.
7. Install 2 coats of Epoxy.com Product #2 – www.epoxy.com/2.htm – 100% Solids Epoxy Based Chemical Resistant Coating with an optional Epoxy Product#50 (small) or Product #51 (large) Anti-Skid additive. Epoxy.com Product#50 and #51 are polypropylene beads that mix with your Product #2 to produce the desired Anti-skid.
Norm Lambert
President &
Director of Technical Support
Epoxy Systems, Inc
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)
352-533-2167 (Voice)
352-465-3497 (fax)
norm@epoxy.com
[Home]
[Catalog of Products]
[Where to Start]
[Bonding Systems]
[Chip Floors]
[Chemical Resistance]
[Coatings]
[Conductive]
[Applications]
[Elastomeric Polyurethane Systems]
[Garage
Floors] [High Temperature]
[Industrial Floors]
[Injection]
[Joint Systems & Sealants]
[Mortars / Grouts]
[Novolac]
[Polymer Systems]
[Primers Sealers]
[Misc.] [Seamless Flooring]
[Waterproofing]
[Dealers Wanted]
[Installation Tips]
[Product Guide]
[Wood Filler]
[Who We Are]
[Guide Specs]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]