Under Water Epoxy and Polymers -FAQs
Epoxy.com Under Water Epoxies and Polymers –
Frequently Asked Questions
Below are some of the questions that have been emailed to Norm Lambert at email@example.com and some of his answers.
Have a question for Epoxy.com? If so, please email Epoxy.com Technical Support.
Patching and Coating With Epoxy.com Products at and Below the Water Line
Q: I am looking for a material that I can use to patch and coat a concrete seawall. I need to repair areas where the salt damage has eaten away the concrete, and protect the rest of the surfaces. The area I need to do is in the tidal zone. I can clean up the concrete, dry it up (if I need to) and apply the a material during low tide, but the product will need to be either very fast setting or be able to cure under water when
the tide comes in. What do you recommend?
Norm Lambert: First you will want to do good surface prepartion – www.epoxy.com/surfaceprep.aspx. Then you will want to use Epoxy.com Product #2707 Splash Zone Coating and Underwater Paste is a moisture-insensitive, two-component, 100% solids epoxy-resin system. When mixed at a 1:1 ratio, by volume, this product produces a paste-like material that is ideal for protection or restoration of concrete, steel and timber piles and other structural elements in marine environments. It will easily do what you are looking to do and a whole lot more as well.
Epoxy.com Product #2707 Splash Zone Coating and Underwater Paste has a long pot-life, and is available in a
fast Cure. Product #2707 Splash Zone Coating and Underwater Paste can be hand applied, above, at or below the water line.It resists wave action and will even bond to wet surfaces.
Director of Technical Support
Epoxy Systems, Inc/
Available by Phone M-F 9AM-4PM Eastern Time (6 AM – 1 PM Pacific Time)